Recent content by beb

hi klined, thanks for the deal. Would you mind emailing me the coupons also. Thanks in advance beb only if they are the printable ones....i know where the other's are. :)

It's at http://www.overclockers.com then go to the cpu data base.... pull up the processor you want to check.... it will give a list of the speeds, motherboards, what the person did to get his/her results, etc.

go to overclockers.com and go to their cpu database.... go to Intel P4.....you will find a list of ocing speeds acheived.... and the motherboards that were used. Notice that down the list a little ways is a MSI Ultra 645 that was used to oc the 1.6a to 2400. Newegg has this board for 73.00 I...

Thanks.... that's basicly what I thought, but wasn't sure. Ordered the 350 watt just to be on the safe side.

Sorry for the double post. Hit the wrong key the first time. On Newegg they have Enhance power supp;ies. a 300 watt and a 350 watt. If you go to Enhances site and look them up they have exactly the same spec's same combined 3+5 rail at 220. What would be the difference.

Thanks Jeremy, I'd thought of that but seems there's a better way....done a search of the web and came up with this solution.....fdisk the second drive and format it as an Extended Dos Partition, then you can partition it into logical partitions. This will keep the drive letters correct, ie...

Thanks Jeremy, I'd thought of that but seems there's a better way....done a search of the web and came up with this solution.....fdisk the second drive and format it as an Extended Dos Partition, then you can partition it into logical partitions. This will keep the drive letters correct, ie...

Hi, I'm going to install a second twenty gig hard drive in my system. The first one is partitioned into four partitions. I'll also partition the second drive into four partitions. My understanding of partitioning is this, please correct me if I'm wrong. #1 hard drive partitioned into 4 parts C...

Hi, Has anyone got the onboard sound on the ecs k7s5a mb to work under WinXP? also need new drivers for umax astra 3400 scanner and epson stylus color 860. There are drivers for win2000 on the web sites....will they work? Thanks for any information Ben

No free sample on the page in my area either :(

use the software that comes with them to set it up....sounds like it needs a program to help it recognize the full capacity of the drive

Are you saying that all the wires from the case go into one connector that hooks to the pins on the mother board....all the cases I've seen had seperate connectors for off/on, reset, hdd led, etc. Your user manual for your motherboard should tell you which wires go where, and if it is just one...

Asus CUSL2, Celron 600@954 at 1.75v, 512 meg Micron Cas2 ram, G400 vid card, Maxtor 20 gig 7200 rpm hdd, Teac 12x10x32 cdrw, SBlive sc, Intel 10/100 nic, USR 56k hardware modem, Toshiba 32X cdrom Will post at 1005 but can't get into windows Will run windows at 981 but not stable

Does anyone know if you can oc a cel 366 to 550 on this board? I just got through flashing it to the new bios and it now has 100mhz fsb and up to 8 multiplyer. How far can you stretch this board? There is no way to increase the voltage, that I could see. Could you use a MSI master sloket and...