Latest activity Postings Featured content About Trophies
-
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.ORICO-M233C3-G4 Works. It is configurable via mptool. Better invest in Thunderbolt/USB4. Especially since they have become much... -
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.I have the same one ORICO on ASM2362. It has very thin and light aluminum. Lots of air inside. And it is necessary to select thermal...
-
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.Never buy cases with plastic inside. For good heat dissipation from the disk and RTL, the case must be made of solid metal. Always and...
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.No problem. SSD drive throttles at high temperatures. What case?
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.Of course :cool: Any case with OLED display SSD1306 directly communicates with RTL9210 via bus I2C. All the images you see on the screen...
-
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.I have one the enclosure on ASM2362. I don't like 20Gbps. This requires a special port, cable and is not compatible with Thunderbolt/USB4.
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.No. Works as USB 3.2 Gen1 (5 Gbps). And this problem most often occurs with AMD processors. I have 5700U and I know someone who has a...
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.I have one laptop with a USB-A 3.2 Gen 2 port. Neither RTL9210 nor JMS583 work well with him. Constant disconnection, sometimes with...
-
Stasiz reacted to twinklestar007's post in the thread Question *STABLE* NVMe - USB Adapter? with
Like.
I tried a laptop with Thunderbolt 4 also - It works fine at 10 Gbps also. I tried another laptop with thunderbolt 3 - It works at 10... -
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.Maybe because of incompatibility? I also confirm that RTL9210 works perfectly on USB4. The firmware updated to the latest?
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.Yes. Or DISK_IPS_THRES = 5. 0x means hexadecimal value. 0x0a equivalent 10. I don't see any problems.
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.Have you tried a different cable? Another chip communicates with RTL9210. For such cases, there is a setting in the configuration file...
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.Latest RTL9210 FW 1.34.39.032625
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.10 min DISK_IPS_THRES = 0x0a
-
Stasiz replied to the thread Question *STABLE* NVMe - USB Adapter?.Any. Problems can be due to lack of power, cable, heating or incompatibility of equipment, etc. This is not all and only on RTL9210...
-
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
Facebook
Twitter