Recent content by Stasiz

ORICO-M233C3-G4 Works. It is configurable via mptool. Better invest in Thunderbolt/USB4. Especially since they have become much cheaper now.

I have the same one ORICO on ASM2362. It has very thin and light aluminum. Lots of air inside. And it is necessary to select thermal pads according to height. Honestly? ORICO and maybe UGREEN has a very high price for such products. This is not mine but inside it is like this: Found mine:

Never buy cases with plastic inside. For good heat dissipation from the disk and RTL, the case must be made of solid metal. Always and no matter what chipset - RTL, JMS or ASM. This is a guarantee of stable operation without overheating and sudden shutdowns.

No problem. SSD drive throttles at high temperatures. What case?

Of course :cool: Any case with OLED display SSD1306 directly communicates with RTL9210 via bus I2C. All the images you see on the screen are stored in the firmware. A separate controller is installed with customized displays. You asked where he is:

I have one the enclosure on ASM2362. I don't like 20Gbps. This requires a special port, cable and is not compatible with Thunderbolt/USB4.

No. Works as USB 3.2 Gen1 (5 Gbps). And this problem most often occurs with AMD processors. I have 5700U and I know someone who has a laptop with 2500U, 5800U and it doesn't work very well there either. This is a cheap DC-DC converter. Which can easily burn out if you install a disk with high...

I have one laptop with a USB-A 3.2 Gen 2 port. Neither RTL9210 nor JMS583 work well with him. Constant disconnection, sometimes with damage to disk partitions with any cables. Works only through one cheapest cable. :)

Maybe because of incompatibility? I also confirm that RTL9210 works perfectly on USB4. The firmware updated to the latest?

Yes. Or DISK_IPS_THRES = 5. 0x means hexadecimal value. 0x0a equivalent 10. I don't see any problems.

Have you tried a different cable? Another chip communicates with RTL9210. For such cases, there is a setting in the configuration file: PERIPH_API = 0x1

Latest RTL9210 FW 1.34.39.032625

10 min DISK_IPS_THRES = 0x0a

Any. Problems can be due to lack of power, cable, heating or incompatibility of equipment, etc. This is not all and only on RTL9210. There are no issues.

You have a very old model.