• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

YACT: So we buffed off the white paint...

Ikonomi

Diamond Member
Update: Right, so. Our friend's stepdad ended up giving us some rubbing compound when we stopped by to say hi, so we went to work on the abraded car. It worked like a charm. We even got out stuff that had been there for years. There were some deep scratches, through the paint, on the nose of the car, and we couldn't do anything about that. But it looks one hundred percent better than it did.

Only problem now is the finish is dulled slightly where we had to use the compound. Will waxing fix this? It's not bad, but you can see that the sheen is gone. I hope we can fix it, and finish the job right.

...

My friend was in a very minor accident the other day, resulting in some white paint and a few small scratches on his black car.

I remember reading that rubbing compound is excellent for fixing this sort of thing, but I'm not sure where to get it. I also don't know which kind would be best to use (3M alone makes several)... It's an area of paint about a foot long overall, and about five inches at the widest.
 
Damn, the obvious strikes again. :Q

I thought it was all professional grade stuff, or something. Thanks a lot, I'll let him know. This is great.
 
Be warned, if this is the 3M rubbing compound I think it is...you're gonna need a buffer to apply it properly.
 
Use Fine Cut II. I wouldn't go straight to rubbing compound just yet, it really agressive. Make sure you your a good polish afterwords.
 
Originally posted by: TechnoKid
Use Fine Cut II. I wouldn't go straight to rubbing compound just yet, it really agressive. Make sure you your a good polish afterwords.

Okay, thanks for the tip. Going to try that first.

yllus, got it. Thanks.
 
As Technokid said, you should always start with the least aggressive compound that will work and progress from there. I get all of my stuff from a local body paint supply store. I use mostly 3M's Machine Glaze for my car, but that's not to obvious scratches.

Good luck, and be sure to check Autopia if you run into any problems.
 
Thanks for the help, guys. It worked really well.

Now we just have to deal with the dull spots in the clear coat...
 
You can buff out the dull by hand with a polish, but I use what descartes uses. 3m machine glaze and a buffer with a polishing pad.
 
Back
Top