xp1800 at xp2600

[jswjimmy]

wow i got up thismorning, and started undervolting and dam at 2066mhz i can get a stable vcore of 1.4, i tryed 1.375 but it became unstable, and a 1.35 it would not boot. i will have a screen cap later. next im going to see how low i can get it at 2200mhz.

edit: xp1800 at xp2700(2170mhz) with a 1.475 vcore
edit: 1530mhz to 2210 with a 1.5vcore 38C under load(seti 20min)

 

[jswjimmy]

picture

 

[phlashphire]

That's pretty impressive! Where did you order this chip from?

 

[jswjimmy]

at local store called C&S computers. its a axda1800 dlt3c jiuhb0320. its the same cpu as the 1700+ that were hiting 2.5ghz on air. i bought it last summer. so fare its maxed out a 2410mhz but if i get a water cooling kit i could hit at least 2500mhz maybe higher. i like to run it at 1666mhz with a 1.2 vcore cuz its nice and cool but still fast, only 28C on a hot day. at stock speed i can run it at 1.1vcore lol. its a good cpu.

 

[Tiamat]

Dude you doing the same sh1t ive been doing for about a week

Unforunately, my dlt3c 1800+ isnt as good as yours. At 10x200, i can do 1.5 Vstable on air.

at 170x11.5, i could pull 1.45 V stable on air, but my comptuer wouldnt post if i gave it less than 1.425V at default.

Reason i did this was because i was bored, and wanted to see if i could get Idle below 40C.

I got mine from Excaliberpc

 

[jswjimmy]

what week is it

 

[Tiamat]

Originally posted by: jswjimmy
what week is it

Unfortunately, I didnt mark down the full name before i slapped on my SLK 947U.

Ill get it sometime this week, since i have to remove my motherboard for other reasons.

From Excaliberpc, here is the thing I bought: AXDA1800DLT3C JIUHB:0350UPMW
This holds true, unless the letters and numbers are unique to each individual processor. If these letters and numbers describes a set of processors, then I am 90% sure this is what I have.

EDIT: I called them up: I have AXDA1800DLT3C JIUHB:0311MPMW