xp 2200+ is a 1350mhz?

[DavidTan]

This is my first amd system. I thought xp perform at 2200+ mhz but the post said it was at 1350mhz which is slower than my p4 1.5 system. Someone told me that you can turbo it through bio to get it actua speed at 1800 mhz. I know this is a stupid noobie question, please help out! thanks

 

[bozo1]

Your FSB is set to 100. You need to change it to 133. It may be a jumper setting but it's in the BIOS on most boards.

 

[shootinyou]

Originally posted by: bozo1
Your FSB is set to 100. You need to change it to 133. It may be a jumper setting but it's in the BIOS on most boards.

Yep what he said. Which mother board BTW??

 

[DavidTan]

thanks, the mobo is a albatron kt400/8235

 

[DavidTan]

ok I went into bio, cpu clock change to 100 to 132. After that, my pc never boot up again. I heard a shhh sound before it went down.. do you know why?
thanks

 

[shootinyou]

Originally posted by: DavidTan
ok I went into bio, cpu clock change to 100 to 132. After that, my pc never boot up again. I heard a shhh sound before it went down.. do you know why?
thanks

I downloaded the manual for that board, I see that it has a FSB jumper (JP2) on page 11 of the manual.

I would recomend you reset CMOS (JP1) page 19 of the manual, and remove the JP4 jumper and see if that doesn't
solve your troubles. Good luck 🙂

 

[DavidTan]

ok it fixed, but it still at 1350mhz.. I guess I need to set the jumper to 2-3 instead of 1-2.. am I'm right.. thanks for answering back

 

[shootinyou]

Originally posted by: DavidTan
ok it fixed, but it still at 1350mhz.. I guess I need to set the jumper to 2-3 instead of 1-2.. am I'm right.. thanks for answering back

Yes

 

[DavidTan]

thanks, bio post now say it an xp 2200+ running at 1800mhz

thanks a lot