xp 1700+ - good or bad code ?

[phpdog]

I just bought an XP 1700+ processor.

The code on the chip is : -

AXDA1700DLT3C 9391567251925
JIUHB0310WPMW 1999 AMD

Thats the numbers on the chip ive heard that some chips are better than others - what do you think of this 1 .

I am hoping that i will get about 2000mhz/2400 mhz out of it.

 

[lchyi]

Originally posted by: phpdog
I just bought an XP 1700+ processor.

The code on the chip is : -

AXDA1700DLT3C 9391567251925
JIUHB0310WPMW 1999 AMD

DLT3C is a good one. Though it's not guaranteed to go as high as others so it's still a gamble. I don't suspect you'll have problems reaching 2ghz. As for pack dates, week made, and all that other stuff is whatever to me. Congratulations, where'd you pick that chip up?

 

[phpdog]

You wouldnt belive how i got that chip.

Ive been looking for a UK based online shop that would supply me with a good 1700+ chip , and to my complete surprise theres only 1 PC shop in my area that does computer parts and they had only 1 1700+ left.

Thats the last place i thought id get 1 , about 5 minute walk from my house.

 

[infinite012]

0310WPMW is one of the better 1700+'s. You can ask Shimmishim for information on how high his 0310WPMW went. I have one too...

 

[Corporate Thug]

i had that exact same chip, got 2300 mhz out of it on 1.65V

edit-where did u get it?

 

[infinite012]

Originally posted by: phpdog
You wouldnt belive how i got that chip.

Ive been looking for a UK based online shop that would supply me with a good 1700+ chip , and to my complete surprise theres only 1 PC shop in my area that does computer parts and they had only 1 1700+ left.

Thats the last place i thought id get 1 , about 5 minute walk from my house.

Were you asking me? Even if you weren't I'll still tell you: pcsupplysource.com

AND I STILL CANT GET 2300!!

 

[phpdog]

After loooking online for ages i got a chip from here :- tayloredcomputerservices I live in Glasgow the shops only along the road.

 

[DivideBYZero]

I have an 0308 that is running 2.1Ghz no sweat. Only put it in the other night so I'm not at the limit yet.

Oh, btw, www.cpucity.co.uk guarantee codes and steppings. I have posted about these guys before. It's where I got my jewel from.

 

[4x4expy]

I could be wrong, but I'm pretty sure that is the chip that Shimmishim is getting 2500mhz out of! Your chances of getting 2400mhz is way above average with that stepping.

 

[Corporate Thug]

Originally posted by: DivideBYZero
I have an 0308 that is running 2.1Ghz no sweat. Only put it in the other night so I'm not at the limit yet.

Oh, btw, www.cpucity.co.uk guarantee codes and steppings. I have posted about these guys before. It's where I got my jewel from.

wow, they even have the 0323RPMW. too bad it is OOS

 

[bgeh]

i have one of those and it hit 2.5Ghz on 1.85v
you got a jewel there
btw, Shim has the WMPW and XMPW
go see my old 1700+ thread titled "Any AT'ers with the 1700+/1800+ T-Bred B's yet?"

 

[phpdog]

Hi ,

Right now im running that chip @ 12.5 x 166 = 2088.06 MHz @ 1.625 vCore.

Can someone recommend some usful settings that they use which should work .

ohh btw what would be the maximum vCore i should use so i dont crank it up too high.

 

[bjc112]

Don't go above 1.85 core... Vdimm 2.7

 

[infinite012]

Originally posted by: phpdog
Hi ,

Right now im running that chip @ 12.5 x 166 = 2088.06 MHz @ 1.625 vCore.

Can someone recommend some usful settings that they use which should work .

ohh btw what would be the maximum vCore i should use so i dont crank it up too high.

Whoa...Why such a high vcore? 12.5x166 should run stable at 1.5 vcore, unless your mobo is overvolting +0.125...

 

[bgeh]

Originally posted by: bjc112
Don't go above 1.85 core... Vdimm 2.7

actually 2.8 is acceptable. manufacturer's recommendation usally range from 2.5-2.8v

 

[montuow]

i plan on buying an xp 1700 w/ this stepping AXDA1700DUT3C JIUHB0312TPMW. does anyone know if this will be able to reach 2.2-2.3 ghz?

 

[screw3d]

This chip is a keeper.

My 0310WPMW from PCSupplySource is running 12 x 200 @ 1.725v

 

[4x4expy]

Originally posted by: bgeh
i have one of those and it hit 2.5Ghz on 1.85v
you got a jewel there
btw, Shim has the WMPW and XMPW
go see my old 1700+ thread titled "Any AT'ers with the 1700+/1800+ T-Bred B's yet?"

For a while excaliberpc was selling wmpw and xmpw seperately and the wmpw would run about $6-7 more. Is it a better chip? I though all 0310's were hot.

 

[4x4expy]

Originally posted by: phpdog
Hi ,

Right now im running that chip @ 12.5 x 166 = 2088.06 MHz @ 1.625 vCore.

Can someone recommend some usful settings that they use which should work .

ohh btw what would be the maximum vCore i should use so i dont crank it up too high.

Is your 8rda+ an old version? Can you not get to 200fsb? It seems you should be able to get higher than you are now.

 

[MDE]

12.5x166 is 2600+ speed... keep that OC going! BTW, the 2600 runs 1.65V stock, so I'd say he's not at too high of a voltage there. I'd say crank the voltage until the chip gets too hot (55C is a good temp to stay under, IMHO) but 1.85 is a good stopping point. All this 1700+ OCing is making me feel like an idiot for buying a 2600+ when they launched the 333 FSB models...

EDIT: was mistaken on the 2600's stock voltage fixed the boo-boo