X800GTO on K7T TURBO2 Motherboard

[ROEHUNTER]

I am upgrading my system and decided to let my brother-in-law use my X800GTO. At the moment he is using a 9600XT in his system.

The problem is the 9600XT works fine , but when we put in the X800GTO it will not show any video signal at all. From watching the HDD lights I believe the computer is booting up normal , just no video at all (not even bios).

I have looked at all the bios settings for the agp and can not figure out what is wrong. My best guess is some kind of incompatibility issue with the agp4x/8x volts.

But I don't understand why the 9600XT works fine and the X800GTO will not show anything.

Any ideas? All comments will be appreciated.

Thanks

 

[DieHardware]

Is the latest MB BIOS update installed? If the card has a power connector connect it, otherwise the MB's AGP slot might not be providing the card with enough power.

 

[ROEHUNTER]

Yes the power connector is connected. I will check on the bios . Thanks !!

 

[ROEHUNTER]

Well I have tried everything .
Cleared CMOS , updated chipset drivers, updated bios, tried all kinds of settings in bios and nothing.
I guess the 2 are just incompatible.

 

[DieHardware]

Does the MB have an AGP voltage jumper or BIOS setting? Updated videocard BIOS?

 

[ROEHUNTER]

I could not find a voltage jumper on the board and the manual says nothing about one.
No bios setting for it either that I could see.