X3350 3.6Ghz OCCT 14hrs stable

[khurios2000]

after playing with GTLREF for about a week.

my DK p35 made finally it stable 14 hrs OCCT mix
http://img149.imageshack.us/img149/3073/dfipb2.jpg

system setup

8x450
vcore: 1.265v bios, 1.248v load
vnb: 1.65v
vtt: 1.35v
gtlref: .61, .61, .67

 

[graysky]

Congrads on that. 1.65V for your NB seems like quite a bit! I dunno how the hell you're only getting 51 °C on it. I have mine set to 1.37 V and p95 will take it up to 55-56 C. You must have some killer cooling for it.

Also, when you said your GTL's were 0.61 0.61 and 0.67, what did you set them to in the BIOS? 82,82, and 91?

You need to post your sh*t over at clubdfi; there's a dude named colelt1 who has been trying this with no luck.

That app you have displayed in the upper middle that says "LanParty DK" and "Current Temperature" etc. That looks like Smart Guardian? What version do you have?

 

[khurios2000]

Originally posted by: graysky
Congrads on that. 1.65V for your NB seems like quite a bit! I dunno how the hell you're only getting 51 °C on it. I have mine set to 1.37 V and p95 will take it up to 55-56 C. You must have some killer cooling for it.

Also, when you said your GTL's were 0.61 0.61 and 0.67, what did you set them to in the BIOS? 82,82, and 91?

You need to post your sh*t over at clubdfi; there's a dude named colelt1 who has been trying this with no luck.

That app you have displayed in the upper middle that says "LanParty DK" and "Current Temperature" etc. That looks like Smart Guardian? What version do you have?

prolly 1.65v too much, i use HR-05 on NB temp really cool, should i be wary?

currently im using Coolermaster RC-590 with 2x140mm on top. nice air flow case.

gtl ref actually set .61 .61 and .67 in bios. not like LT/LP P35.

the smatguardian using xs skins

 

[Foxery]

Nice. Which exact motherboard (and chipset) is this?

That's a freakishly low vcore for that speed... you must have exotic cooling

 

[Thor86]

9x450 = 4.0Ghz, don't you mean 8x450?

 

[khurios2000]

Originally posted by: Thor86
9x450 = 4.0Ghz, don't you mean 8x450?

yes its 8x450, its a typo

 

[bryanW1995]

Originally posted by: Foxery
Nice. Which exact motherboard (and chipset) is this?

That's a freakishly low vcore for that speed... you must have exotic cooling

Keep in mind that he's at 1.248 load, plus his nb voltage is very high and his cpu vtt is a little high. I'm 24/7 stable at 1.27 load at 3.6 on my ip 35pro with an x3350 with 1.52 mch and 1.30 cpu vtt, so that's pretty close. also, he appears to have better cpu cooling.

 

[khurios2000]

Originally posted by: bryanW1995

Originally posted by: Foxery
Nice. Which exact motherboard (and chipset) is this?

That's a freakishly low vcore for that speed... you must have exotic cooling

Keep in mind that he's at 1.248 load, plus his nb voltage is very high and his cpu vtt is a little high. I'm 24/7 stable at 1.27 load at 3.6 on my ip 35pro with an x3350 with 1.52 mch and 1.30 cpu vtt, so that's pretty close. also, he appears to have better cpu cooling.

let me see if i can lower the vNB and vtt like yours,
i know mine can do 1.22v load prime95 stable with no problem,
OCCT is something else

 

[khurios2000]

Originally posted by: Foxery
Nice. Which exact motherboard (and chipset) is this?

That's a freakishly low vcore for that speed... you must have exotic cooling

DFI LP DK P35 T2RS

cooling Thermalright Ultra-Extreme 120