Hi guys. I have a Sapphire x1900xtx with an accelero x2 installed on it.
When I first installed the accelero x2 on it many months ago, I had also done a bios flash to set the fan speed at 100% all the time.
The temps back then were very nice.. hottest it was running was around 72 degrees.
But now I just did some more testing and the card is running super hot! up to 95 degrees! yikes!
I just remade sure that the bios still made the fan run at 100% and it should.. the setting is still there in the bios. So I'm not sure what's going on.. could it be dust that's clogging the fan bigtime? Or what else could be causing this sudden hardcore diminution in the cooling efficiency of my fan?
Thanks all!
When I first installed the accelero x2 on it many months ago, I had also done a bios flash to set the fan speed at 100% all the time.
The temps back then were very nice.. hottest it was running was around 72 degrees.
But now I just did some more testing and the card is running super hot! up to 95 degrees! yikes!
I just remade sure that the bios still made the fan run at 100% and it should.. the setting is still there in the bios. So I'm not sure what's going on.. could it be dust that's clogging the fan bigtime? Or what else could be causing this sudden hardcore diminution in the cooling efficiency of my fan?
Thanks all!