Would I be able to run with this PSU?

[mOeeOm]

this PSU:

http://www.xpcgear.com/ocz45012u.html

to run this rig I'm planning to build....

mobo: http://www.ncix.com/products/index.php?...ANPARTY-UT-NF4-ULTRA-D&manufacture=DFI

processor: http://www.ncix.com/products/index.php?...14850&vpn=ADA4000BNBOX&manufacture=AMD

HD: 80GB Western Digital (I don't use up a lot of space)

Vid card: http://www.bestbuy.ca/catalog/proddetai...gid=EN&sku_id=0926INGFS10059866&catid=

Two of these Ram: http://www.ncix.com/products/index.php?...=KVR400X64C3A/512&manufacture=Kingston

A cheap sound card, CD-drive, DVD-drive, Case I'm taking out from other comp.

Thanks.

 

[The Pentium Guy]

Plenty. In fact it might be overkill.

 

[UsandThem]

Originally posted by: The Pentium Guy
Plenty. In fact it might be overkill.

:thumbsup:

You will have plenty of juice to spare since it is a 450w PSU.

 

[Gamingphreek]

Originally posted by: The Pentium Guy
Plenty. In fact it might be overkill.

 

[imported_rod]

Should be plenty.

RoD

 

[mOeeOm]

thnx guys, so what do you think of the rig? Any better options out there(within a decent buget 😛)

 

[KoolDrew]

Actually according to DFI-street you need a 480w+ 24-pin PSU for the NF4 mobos. In that case this is the best bang for the buck.
http://www.costcentral.com/proddetail/Antec_SmartPower_20_SP_500/SP500/F09966/

 

[UsandThem]

Originally posted by: mOeeOm
thnx guys, so what do you think of the rig? Any better options out there(within a decent buget 😛)

I'd get some better ram. Cas3 ram is the slowest they make.

You have very high end parts picked out for everything else, so just spend the little extra and get some Cas2 or Cas 2.5 ram.

 

[KoolDrew]

Get some cheap CAS2.5 stuff such as Crucial.

 

[knothead34]

if that ram is hynx based it wont do well with dfi nforce 4 boards. go to dfi-street.com if you want ram and power supply suggestions.

 

[ElFenix]

Originally posted by: KoolDrew
Actually according to DFI-street you need a 480w+ 24-pin PSU for the NF4 mobos. In that case this is the best bang for the buck.
http://www.costcentral.com/proddetail/Antec_SmartPower_20_SP_500/SP500/F09966/

pretty good price. i'd go with an antec before a boy-ricer PS like the OCZ, myself.

although i seriously think that anything more than a good 300 is overkill.

if you get a POS no name PS then maybe you need '450' marked on the box, but that is because the PS is actually a 300.

 

[dnuggett]

YEs, that PSU will work fine.


Personally I prefer Antec though.

 

[pradeep1]

YES. 😉