• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Woodworking & Finish Question

crabbyman

crabbyman

Senior member
I am just beginning to dabble in playing with wood (*chuckles*) and I have a question.

For a present I am making a side table that will be in a bathroom. I am going for a rustic look with the table top and shelves. I bought some cedar and I am going to sand it down a little.

My question is... what kind of finish should I use for cedar in a bathroom?

Googling brings up as many opinions as asking about politics in OT here. Just trying to see what others may suggest.
 
If the wood is not especially dark, I'd go with a oil based polyurethane. It will warm it the tones and give a good finish. If it is dark wood, oil or water based works because you won't notice too much of a change.
 
Local stores do not have teak. I thought about it but did not see any and also did not want to spend too much on a simple project.

The cedar appears to be a young cedar or white cedar. It is lighter in color.

Doesn't oil poly smell for ages?

The suggestions I have seen online vary from Danish oil to water based polyurethane to linseed oil to shellac.
 
crabbyman said:
Doesn't oil poly smell for ages?
Click to expand...

Nothing that has ever bothered me... General has water base if you would like. It's sold at both Rockler Woodworking and Woodcraft both have OH locations with guys/gals that will want to talk with you for hours about your project😉
 
Use either an oil based poly or water based. Both will hold up well to humid conditions in a bathroom. Just be aware that the oil based and water based may look a bit different in tone from one another once on the wood and fully cured. You may want to buy a can of each and use on a scrap piece before committing to one or the other.

As far as smell.. Once poly fully cures you shouldn't have too much odor other than near surface odor. Water based will smell less initially but after a few days of curing and a coat of paste wax, oil based poly is not stinky at all.
 
I've been impressed by the minwax 'helmsman'.... But as an amateur woodworker my biggest suggestion is to test... test... test... and test again... on scrap pieces before touching the final plank.
 
SpatiallyAware said:
I've been impressed by the minwax 'helmsman'.... But as an amateur woodworker my biggest suggestion is to test... test... test... and test again... on scrap pieces before touching the final plank.
Click to expand...

I saw that stuff. There is a mail in rebate right now for it too. I was just wondering if it was overkill for my project.

I do not think it will be soaked in water. It will sit next to a sink and may get splashed on though.
 
crabbyman said:
I saw that stuff. There is a mail in rebate right now for it too. I was just wondering if it was overkill for my project.

I do not think it will be soaked in water. It will sit next to a sink and may get splashed on though.
Click to expand...

Helmsman is made for stuff that will get rained on... outdoors. Overkill in my opinion, but if it is cheaper than poly after rebate then I suppose there is no harm there.
 
All Minwax poly urethane has a rebate right now. So it is not just the spar version.

I also have a coupon for Lowes for $10 off of $50. So I may pick up a few other things as well.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top