Won't POST

[Mrvile]

I'm on a 3500+ Winnie at 2.6 right now. My settings are:

HT: 3x
FSB: 260
Multi: 10x
Vcore: 1.5
Overvid: 8.3%
AGP: 66
Ram voltage: 2.75
AGP Voltage: 1.5

I'll go and set the FSB up 10, but as soon as that happens my mobo stops POSTing and I have to reset CMOS. Any suggestions? I'm using OCZ EL Gold Rev2 DDR500 ram.

 

[mwmorph]

leave it as it is or get a new upgraded cooler.
i would leave it though. 2.6 is damn fast as it is already. it'll run your games fine.

 

[JBDan]

Have you tried bumping the agp up to 1.6? Or bumping the RAM volts to 2.8? Wow you are going for 2.7 nice

 

[Mrvile]

Thanks guys I'm gonna run everyday at 2.6, I mean I really don't need the 2.7 but it would be nice just to hit it, brag, then back it off.

 

[Mrvile]

Well, I did what you told me Dan and got it to post. Now time for some P95 failure.

EDIT: Died in 15 seconds. Time for some voltage uppage.

 

[JBDan]

LOL you are a brave one! Prime 95 stable @ 2.6? Excellent if so!

 

[Mrvile]

Well P95 has been running for the past minute but I'm getting yucky temps (just under 55). If I get this to run stable I'm gonna back off from 1.63 or whatever I'm at to 1.59

EDIT: Did I just get lucky or something? I run 2.6 at like 1.55v, barely OC the ram, and no raising of AGP frequency or voltage.

3 minutes, crapped out on me. Forget it.

 

[JBDan]

Originally posted by: Mrvile
Well P95 has been running for the past minute but I'm getting yucky temps (just under 55). If I get this to run stable I'm gonna back off from 1.63 or whatever I'm at to 1.59

EDIT: Did I just get lucky or something? I run 2.6 at like 1.55v, barely OC the ram, and no raising of AGP frequency or voltage.

3 minutes, crapped out on me. Forget it.

Hah! 2.6 is nice man go with it.

 

[Mrvile]

lol yeah well I had fun, I'm back down to FSB: 306, Multi: 8.5x, giving me roughly 2.6ghz. I forgot what voltages I was giving it so I just set it to something like 1.45@8.3%, which is like 1.5 - 1.52v. Time to run P95.

Weird: When I had my voltages at like 1.6 my idle temps were around 31, now with them lower the idle temps are around 34 (33 if I get lucky). Explanation?

 

[JBDan]

Originally posted by: Mrvile
lol yeah well I had fun, I'm back down to FSB: 306, Multi: 8.5x, giving me roughly 2.6ghz. I forgot what voltages I was giving it so I just set it to something like 1.45@8.3%, which is like 1.5 - 1.52v. Time to run P95.

Weird: When I had my voltages at like 1.6 my idle temps were around 31, now with them lower the idle temps are around 34 (33 if I get lucky). Explanation?

Hmmm (scratchin my head)... Maybe faulty software monitor readings? You open a window? lol

 

[JBDan]

Originally posted by: Mrvile
lol yeah well I had fun, I'm back down to FSB: 306, Multi: 8.5x, giving me roughly 2.6ghz. I forgot what voltages I was giving it so I just set it to something like 1.45@8.3%, which is like 1.5 - 1.52v. Time to run P95.

Weird: When I had my voltages at like 1.6 my idle temps were around 31, now with them lower the idle temps are around 34 (33 if I get lucky). Explanation?

Sorry my intrnet connec went out i guess

 

[Mrvile]

Ok thanks Dan for all the help. I'm at 306x8.5, 1.5@5.0%, and I'll stick with that. She's been through a lot today, I'm proud of her, time to give it a break.

Let's move onto Mr. 6800GT...

 

[JBDan]

Originally posted by: Mrvile
Ok thanks Dan for all the help. I'm at 306x8.5, 1.5@5.0%, and I'll stick with that. She's been through a lot today, I'm proud of her, time to give it a break.

Let's move onto Mr. 6800GT...

lol g-luck Mr. !