My computer is a NIGHTMARE that I cant wake up from. here are the details, maybe you could shed some light.
Problems in order of importance:
1. CONSTANT Freezes and lockups. These occur: 1) randomly 2) pretty consistently, when I am playing an mp3 3) Usually, when I try to play UT after a short while.
2. The Occasional Kernel_Stack_Inpage_Error.
3. Constant errors that look like this:
Event Type: Error
Event Source: WinMgmt
Event Category: None
Event ID: 37
Date: 1/21/2002
Time: 3:32:59 AM
User: N/A
Computer: A2
Description:
WMI ADAP was unable to load the perfproc.dll performance library due to an unknown problem within the library: 0x0
or this:
Event Type: Error
Event Source: WinMgmt
Event Category: None
Event ID: 41
Date: 1/21/2002
Time: 3:32:59 AM
User: N/A
Computer: A2
Description:
WMI ADAP was unable to create object index 2212 for Performance Library MSDTC because no value was found in the 009 subkey
4. Occasionally, the ATA100 Card fails to detect boot drive. This happens after a lockup. powering down and repowering up after a couple minutes seems to fix this one, but it seems iffy.
5. Floppy drive failure at boot. Perhaps I have the cable in wrong?
Hardware:
Mobo: Soyo K7VIA w/ onboard sound (Bios is set to Fail Safe settings, b/c Optimized will not boot)
CPU: Athlon Slot A T-Bird 750
PSU: Brand New Enermax 330W (EG-365VE)
Ram:
1. Micron Technology 100 MHZ 128MB
2. Kingston Technology 100 MHZ 128MB
3. Hyundai Electric 133MHZ 128MB (I presume this is running at 100).
Video: Guillemot 3D Prophet SE (Geforce) 32 MB w/KDS VS195-E monitor
Network: Network Everywhere 10/100 card. (NC100 v.2)
Controller Cards: 1. Maxtor (Promise) ATA100 Card
2. Adaptec 2910 SCSI Adapter (only the CDR is on this)
Other Cards/Assort.:
1. Hauppague WinTV Card
2. Generic 56K Modem
3. I have a X10 Firecracker module attached to my serial port.
Input: Logitech Wireless Desktop (kbd + mouse are wireless)
Drives: 1. Maxtor 40 GB 7200 RPM ATA100 (on Maxtor ATA card)
2. Maxtor 80 GB 5400 RPM ATA100 (on Maxtor ATA card)
3. Panasonic CD-R (7502B) (on SCSI Adapter)
4. Generic 56X CD-Rom (in ATA33 port onboard)
Other Details: I Have every Microsoft update installed, including SP2. I have the latest Detonator Drivers (video) and the latest VIA 4 in 1 drivers installed. I have legacy audio disabled in the Bios. There is no overclocking. I have both hardware audio and video acceleration set 1 notch below max.
1. A full listing of IRQ's IRQ's
2. A full report of My system, including driver versions (185K) Full Report
3. A list of tasks running after startup <a class=ftalternatingbarlinklarge href="http://www.umich.edu/~trehan/tasks.gif" target=blank>Task Manager
</A>4. A list of all services running. ServicesServices
If there are any more details I can provide, I would be happy to. Please feel free to PM or email or contribute to this thread.
Problems in order of importance:
1. CONSTANT Freezes and lockups. These occur: 1) randomly 2) pretty consistently, when I am playing an mp3 3) Usually, when I try to play UT after a short while.
2. The Occasional Kernel_Stack_Inpage_Error.
3. Constant errors that look like this:
Event Type: Error
Event Source: WinMgmt
Event Category: None
Event ID: 37
Date: 1/21/2002
Time: 3:32:59 AM
User: N/A
Computer: A2
Description:
WMI ADAP was unable to load the perfproc.dll performance library due to an unknown problem within the library: 0x0
or this:
Event Type: Error
Event Source: WinMgmt
Event Category: None
Event ID: 41
Date: 1/21/2002
Time: 3:32:59 AM
User: N/A
Computer: A2
Description:
WMI ADAP was unable to create object index 2212 for Performance Library MSDTC because no value was found in the 009 subkey
4. Occasionally, the ATA100 Card fails to detect boot drive. This happens after a lockup. powering down and repowering up after a couple minutes seems to fix this one, but it seems iffy.
5. Floppy drive failure at boot. Perhaps I have the cable in wrong?
Hardware:
Mobo: Soyo K7VIA w/ onboard sound (Bios is set to Fail Safe settings, b/c Optimized will not boot)
CPU: Athlon Slot A T-Bird 750
PSU: Brand New Enermax 330W (EG-365VE)
Ram:
1. Micron Technology 100 MHZ 128MB
2. Kingston Technology 100 MHZ 128MB
3. Hyundai Electric 133MHZ 128MB (I presume this is running at 100).
Video: Guillemot 3D Prophet SE (Geforce) 32 MB w/KDS VS195-E monitor
Network: Network Everywhere 10/100 card. (NC100 v.2)
Controller Cards: 1. Maxtor (Promise) ATA100 Card
2. Adaptec 2910 SCSI Adapter (only the CDR is on this)
Other Cards/Assort.:
1. Hauppague WinTV Card
2. Generic 56K Modem
3. I have a X10 Firecracker module attached to my serial port.
Input: Logitech Wireless Desktop (kbd + mouse are wireless)
Drives: 1. Maxtor 40 GB 7200 RPM ATA100 (on Maxtor ATA card)
2. Maxtor 80 GB 5400 RPM ATA100 (on Maxtor ATA card)
3. Panasonic CD-R (7502B) (on SCSI Adapter)
4. Generic 56X CD-Rom (in ATA33 port onboard)
Other Details: I Have every Microsoft update installed, including SP2. I have the latest Detonator Drivers (video) and the latest VIA 4 in 1 drivers installed. I have legacy audio disabled in the Bios. There is no overclocking. I have both hardware audio and video acceleration set 1 notch below max.
1. A full listing of IRQ's IRQ's
2. A full report of My system, including driver versions (185K) Full Report
3. A list of tasks running after startup <a class=ftalternatingbarlinklarge href="http://www.umich.edu/~trehan/tasks.gif" target=blank>Task Manager
</A>4. A list of all services running. ServicesServices
If there are any more details I can provide, I would be happy to. Please feel free to PM or email or contribute to this thread.
