Will K6-2 and K6-3's work in all socket 7 boards?

[Haervii]

Look at my sig. Might it work with that one?

 

[ltk007]

I don't know that board, but most likely with a bios flash there should be no problem.

 

[ModemMix]

there is a nice article at toms hardware about just this subject toms socket 7 fit for life article Follow thi link and read the article tom is always a long winded blowhard but but eventualy he comes to a point or two about somthing or another and in this case your questions should be answered.

I can tell you in short that yes those chips should run on a socket 7 board that supports a 100 mhz bus speed but in his articke he refrences older socket 7 boards that support lower fsb setting an he mention that the chips will run at other speeds and will run at or near the spec'ed speeds at 75 and 83 mhz fsb's


Hope that helps..

ModemMix

 

[glp1del]

You can download the manuels for that board heredepending on whether you have rev 1 or rev 2/3.

Glp1

 

[Haervii]

Thanx glp. I don't think it'll work but oh well I'll just go K7 🙂