Which motherboard???[fast replys?)

[Twista]

I need help pretty quick.
K7N2 Delta-L
Specifications:
Supported CPU:AMD® Athlon(tm)/Athlon(tm) XP/Duron(tm) processors
Chipset:nVIDIA® nForce2 Ultra 400 Chipset
FSB:200/266/333/400 MHz
RAM:3x DDR PC3200/2700/2100/1600 up to 3GB
IDEual Channel Ultra DMA133/100/66 max 4 Devices
Slots:1x AGP 1.5v 4X8X, 5x PCI 32-bit PCI and 1x ACR
Ports:2xPS2,1xCOM,1xLPT,1xLAN,4xUSB and Audio Ports
Onboard Audio:AC97 Interface supporting up to two concurrent codecs
Onboard LAN: Chipset integrated 10/100 Base-T Ethernet/Fast Ethernet

or
XFX NF24ALH

Supported CPU: Socket A AMD Athlon/Athlon XP/Duron Processors
Chipset: NVIDIA nForce2 400 + MCP
FSB: 400/333/266/200MHz
RAM: 3x DIMM DDR400/333/266/200 Max 3GB
IDE: 2x UltraDMA 133 up to 4 Devices
Slots: 1x AGP 8X, 5x PCI
Ports: 2xPS2,1xLPT,2xCOM,1xLAN,6xUSB2.0(Rear 2),1xGame,Audio Ports
Onboard Audio: 6-Channel AC97 Codec
Onboard LAN: 10/100Mbps Fast Ethernet
Form Factor: ATX

or
GA-7S748-L


Specifications:
Supported CPU: Socket A AMD AthlonXP/Athlon/Duron Processors
Chipset: SiS 748 + SiS 963L
FSB: 400/333/266/200MHz
RAM: 3x DIMM for DDR400/333/266 Max 3GB
IDE: 2x UltraDMA 133 up to 4 Devices
Slots: 1x AGP 8X/4X, 5x PCI
Ports: 2xPS2,1xLPT,2xCOM,1xLAN,6xUSB2.0(Rear 4),Audio Ports
Onboard Audio: Realtek ALC655 6-Channel AC97 Codec
Onboard LAN: Realtek 8201 10/100Mbps
Form Factor: ATX

I sent back a DOA board to newegg and today i see they closed my RMA and refunded me my money back wtf! Why didnt they ship out a new motherboard! Damn it. Now i gotta wait till i can get my moms CC again.. (yes till i ask her)

 

[jpeyton]

MSI or XFX look about the same. Either one. Skip the SiS.

 

[Schadenfroh]

Originally posted by: jpeyton
MSI or XFX look about the same. Either one. Skip the SiS.

ditto, get the msi or the xfx based on which one has the best warrenty and price

 

[MDE]

I know someone that couldn't get two different XFX boards to run over 100MHz FSB on a 2500+. I'd skip all three and go for the Shuttle nForce2 board or NF7-S Rev 2 (not NF7-S2).

 

[Twista]

Im getting the XFX soon as newegg and the CC gets my damn money back on my card! Hows the KT600 chipsets? I only had problems with via and radeon so i skip VIA. Are they doing better? And does the Radeon series have problems like it has with all the other via chipsets?

NF7-S= 2 much money
actually both are too much for me. Having bad times right now with computers and money. So im going t o get one of thoses.

 

[MDE]

What about the Shuttle AN35-N Ultra? It's only $60.

 

[CraigRT]

Originally posted by: MDE
I know someone that couldn't get two different XFX boards to run over 100MHz FSB on a 2500+. I'd skip all three and go for the Shuttle nForce2 board or NF7-S Rev 2 (not NF7-S2).

I agree. XFX? no thanks.