Which is Best OC for 3200+ & NF4 & Ballistix!

[HamidFULL]

Which OC is best (best = 2 year life & best performance) :
A64 HTT 313MHz / Multiplier 8 / Mem 2.5-2-2-6 @ 250MHz Divider 166MHz = 2500MHz
A64 HTT 278MHz / Multiplier 9 / Mem 2.5-2-2-6 @ 250MHz Divider 183MHz = 2500MHz
A64 HTT 250MHz / Multiplier 10 / Mem 2.5-2-2-6 @ 250MHz Divider 1:1 = 2500MHz
A64 HTT 250MHz / Multiplier 10 / Mem 2-2-2-6 @ 208MHz Divider 166MHz = 2500MHz

I am useing DFI LP UT NF4 Ultra-D and A64 3200+ E6 and Crucial Ballistix 2-2-2-6 (more in my rig)
I want to reach 2500MHz with safe OC (Safe = low voltage ,longer life)
U have better idea?!

 

[LiquidImpulse]

2500MHz? lets try 2600MHz 😉

 

[furballi]

Last setting.

 

[imhungry]

I'd say that the third one looks the best.

Either that for the first.
😀

I don't like ram dividers.

 

[LiquidImpulse]

3rd one, no need for dividers=good. Even though you loosened up the timings a bit,2.5-2-2-6 @ 250MHz >2-2-2-6 @ 208MHz

 

[Unkno]

third one.....you mentioned about you want it to be safe (long live...)....what's the voltage your at, 1.55V?

 

[Avalon]

The third setting looks best to me, although the last setting would also be very close. The top two settings serve no point when the third one is available.

 

[furballi]

You should be able to increase the FSB by 5 to 7 MHz with the last setting if you can run the 3rd overclock. Bump up Vcore to 1.5.

 

[aigomorla]

yikes, 1.55V?? that is a little too much for me even with water cooling. :X i also opt the third one, but the first one isnt so bad either since it gives u a larger memory bandwith.