Which HSF for a Slotket and BX Master

[Wik]

Ok I have a MSI BX Master and an Iwill II. I have a cCo Celeron 633 that will do 1045mhz for about 20 minutes before a lock up. I have a Golden orb on it now and was going to get some Artic Silver for it but thought maybe I should just order a Alpha also. Best I can tell I have about 72mm of space between the CPU die and the 3rd dimm slot. I need to have the 3rd and 4th slot for 2 128meg dimms. Any suggestions on what I can buy to get this puppy cool enough to run at my 1045? $50 and under is the limit so water cooling is not an option.

 

[JmsAndrsn]

Pep66 should be more than enough. With it's side-mounted fan, you may not lose any DIMM slots(might lose 1 under worst case scenario).

 

[osage]

Alpha PEP66 is what you want, made for slotket use. great HSF

 

[Wik]

Thanks guys, that is what I was thinking also. Which fan should I get to get the most airflow? I don't really care of how much noise the fan makes as it will be hard to notice with the 14 other fans plus the PS fan in the case.

 

[JmsAndrsn]

Even though you sound prepared for a loud fan, I would still recommend staying away from the Delta 38cfm fan. I too thought I could handle but it is somewhat unbearable. Do yourself a favor and either get the YS Tech 26/27cfm or the Sunon 23cfm fan. The Delta may get your 2 or 3F lower but it will proabably not make that much of a difference.

 

[osage]

the YS Tech 27 cfm is a real good choice. not very much noise and it flows plenty of air. but if you must have the max get the 38 cfm Delta, but it is loud.

 

[Wik]

That bad huh? Thanks guys, I will do some price checks on some.