What's your CPU Temp on a Epox 8KHA+?

Naths

Junior Member
Nov 10, 2001
16
0
0
I'm using an Epox 8KHA+ with a Duron 850 and my CPU temp after playing games is 43C. Is this normal?
System temp is 29-30C. GeForce2GTS and good case air flow.

What's your CPU Temp on a Epox 8KHA+?
 

SpecialEd

Platinum Member
Jul 18, 2001
2,110
0
0
I'm getting about 38-42C with an Athlon XP 1600 on my Epox 8kha+


I use an SK6 with 80mm Sunon Fan... artic silver II as well....

runs wonderfully!:D




edit: you cpu temp is fine... you shouldn't really worry about temps until your in the 55-65C range...
 

t4t3r

Senior member
Oct 19, 2001
277
0
0
i have an 8kha+ with a xp 1600+ and my cpu temps have NEVER gone above 41c. i am cooling my xp with an sk6 and delta screamer. they got to 41c when i was running the burn7k program. they usually get up to about 37-39 running 3dmark2001, games like RtcW/Q3/Tribes2, and SETI. like the other post, any temps in the 40s are fine. start to worry when you get to the 55-60c marks.



t4t3r
 

Wind

Diamond Member
Jul 22, 2001
3,034
0
0
Temp is fine. My Duron 800@994 f/load @ 49C, case temp @ 39C. Stable as rock.
 

FIFO

Member
Dec 15, 2001
114
0
0
I know that this is a slightly old post, but I wanted to put my results in.

I am running:
Enermax 350w switching PSU w/2 fans
Duron 600 @ 866
Vcore @ 1.85 (Soon to be 2.09)
FSB @ 144

Cooling:
Coolermaster DP5-6h11
Delta 7200 rpm 60mm fan (36 cfm rated)
Arctic Silver II thermal compound.
Coolermaster 80mm intake and exaust fan

After running Prime95 for 10 days straight, I never saw a temp higher than 33 celcius. Pretty impressive stability, not to mention temperature.
 

FatMan42

Senior member
Aug 17, 2001
219
0
0
Here's the set-up...
8KHA+ with Jan02 BIOS
Unlocked "1800+" chip at 1.60GHz
1.75v core (default)
Noisecontrol Silverado cooler on highest speed setting (and still it's silent unless you've got the case open and the case fans off!)
T-idle: 41C
T-max: 50C
...but that's with poor case ventilation. I've spent no time routing cables etc, and I've got redundant hardware in the case. I'm hoping that once I sort the case out I'll have more overhead to do higher overclocking. No FSB-overbussing, I'm going to do it all with the multiplier.
 

Crucial

Diamond Member
Dec 21, 2000
5,026
0
71
Running an athlonXP 1600 OC to 1800. SK6 cooler. With the delta screamer fan I never went above 41deg. With a slower but liveable ystech fan I get no higher than 50deg at full load.
 

t4t3r

Senior member
Oct 19, 2001
277
0
0
edit: sorry, i posted to this thread again after a month, guess i didnt see my other post. but a small update: i changed my delta screamer to an 80mm sunon, just like SpecialEd. under load, my temps havent gone above 42c, so i am very happy. that high-pitched noise is fianlly gone.



t4t3r