FFactory0x
Diamond Member
Whats the difference with a P4 1.8 and 1.8a???Also how would i find which 1.8ghz cpu i have????
Also im guessing it overclocls so after this answer, here is my mb
Intel (Monterrey) motherboard - 1.8-GHz
Form Factor ATX (12.0×9.6 inches)
Processor Support for an Intel® Pentium® 4 processor
400 MHz system data bus
Memory Two Direct-RDRAM channels with two RIMMs per channel (four RIMM sockets)
Support for up to 2 GB of system memory using PC600 or PC800 RDRAM
Chipset Intel® 850 Chipset consisting of:
Intel 82850 Memory Controller Hub (MCH)
Intel 82801BA I/O Controller Hub (ICH2)
Intel 82802AB 4 Mbit Firmware Hub (FWH)
I/O Control SMSC LPC47M102 LPC bus I/O controller
Video AGP connector supporting 1.5 V 4X AGP cards
Peripheral Interfaces Four Universal Serial Bus (USB) ports
One serial port
One parallel port
Two IDE interfaces with Ultra DMA, ATA-33/66/100 support
One disk drive interface
PS/2 keyboard and mouse ports
Expansion Capabilities Five PCI bus add-in card connectors (SMBus routed to PCI bus connector 2)
BIOS Intel/AMI BIOS (resident in the Intel 82802AB 4 Mbit FWH)
Support for Advanced Power Management (APM), Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS
Instantly Available PC Support for PCI Local Bus Specification Revision 2.2
Suspend to RAM support
Wake on PCI, CNR, RS-232, front panel, PS/2 keyboard, and USB ports
Hardware Monitoring features Two fan sense inputs used to monitor fan activity
Enhanced thermal monitor and fan control device Two additional fan sense inputs
Two additional thermal sense inputs
Also im guessing it overclocls so after this answer, here is my mb
Intel (Monterrey) motherboard - 1.8-GHz
Form Factor ATX (12.0×9.6 inches)
Processor Support for an Intel® Pentium® 4 processor
400 MHz system data bus
Memory Two Direct-RDRAM channels with two RIMMs per channel (four RIMM sockets)
Support for up to 2 GB of system memory using PC600 or PC800 RDRAM
Chipset Intel® 850 Chipset consisting of:
Intel 82850 Memory Controller Hub (MCH)
Intel 82801BA I/O Controller Hub (ICH2)
Intel 82802AB 4 Mbit Firmware Hub (FWH)
I/O Control SMSC LPC47M102 LPC bus I/O controller
Video AGP connector supporting 1.5 V 4X AGP cards
Peripheral Interfaces Four Universal Serial Bus (USB) ports
One serial port
One parallel port
Two IDE interfaces with Ultra DMA, ATA-33/66/100 support
One disk drive interface
PS/2 keyboard and mouse ports
Expansion Capabilities Five PCI bus add-in card connectors (SMBus routed to PCI bus connector 2)
BIOS Intel/AMI BIOS (resident in the Intel 82802AB 4 Mbit FWH)
Support for Advanced Power Management (APM), Advanced Configuration and Power Interface (ACPI), Plug and Play, and SMBIOS
Instantly Available PC Support for PCI Local Bus Specification Revision 2.2
Suspend to RAM support
Wake on PCI, CNR, RS-232, front panel, PS/2 keyboard, and USB ports
Hardware Monitoring features Two fan sense inputs used to monitor fan activity
Enhanced thermal monitor and fan control device Two additional fan sense inputs
Two additional thermal sense inputs