Originally posted by: robertk2012
What motherboard will you use? If you have a DFI ultra or something as good you can just go with a 165. Your better off with a 175 or 170 if you have a cheaper motherboard.
Originally posted by: aboothman
get a 170 from Monarch. The coupon is still good. That is, unless you want a retail CPU with the heatsink and 3 year warranty ect....warranty that is void once you OC.
Monarch Opteron Deals
Originally posted by: BTRY B 529th FA BN
http://wiki.extremeoverclocking.com/wiki/Opteron_Steppings#Stepping_Info this is a good guide for you, but again its all luck of the draw
look at the near bottom of the page...under "stepping info" says the 170's of week 30 were really good.
good luck
Originally posted by: aboothman
get a 170 from Monarch. The coupon is still good. That is, unless you want a retail CPU with the heatsink and 3 year warranty ect....warranty that is void once you OC.
Monarch Opteron Deals
Originally posted by: CosmoHorizon
I also recommend 165, i got my Opty runnign at 2.56 @ stockvoltage, next will try 2.7 @ 1.4V and see how it turns out
Well, i guess it does depend on the individaul chip, but an 165 will run 2.4GHZ (300*8) without much of an issue, given that you have a good main board
I personally prefer the 250 HTT, since it gives a nice 1000 Hypertransfer bus, but i remember somewhere that the bus doesn't matter when it's over like 800 or so....can some one confirm that?
Originally posted by: vertigofm
Originally posted by: BTRY B 529th FA BN
http://wiki.extremeoverclocking.com/wiki/Opteron_Steppings#Stepping_Info this is a good guide for you, but again its all luck of the draw
look at the near bottom of the page...under "stepping info" says the 170's of week 30 were really good.
good luck
week 30!?!? How on earth do I know if I am getting one from that week?
Originally posted by: BTRY B 529th FA BN
Originally posted by: vertigofm
Originally posted by: BTRY B 529th FA BN
http://wiki.extremeoverclocking.com/wiki/Opteron_Steppings#Stepping_Info this is a good guide for you, but again its all luck of the draw
look at the near bottom of the page...under "stepping info" says the 170's of week 30 were really good.
good luck
Yeah I wouldnt even think about going to 1.65 on voltage. 1.5 is as high as Ill even think about going. 1.45 is even better.
week 30!?!? How on earth do I know if I am getting one from that week?
Get a time machine? haha jk, yeah, its the luck for the draw, all we can do is provide info on which weeks are doing good.
I just got my Opteron 170 from Monarch which i ordered 2.16.06 and its a CCB1E 0550 VPMW
but i have no way to clock it yet cause im waiting for the 580 MB chipsets by ATi. I hear the Asus one doesn't give above 1.65 vcore voltage meaing people with Opterons have a low ceiling for clocking.