... what voltage for the RAM?!?

[thereaderrabbit]

I'm in the process of replacing my motherboard. (the old one died). I'm running at PII-300 with 3 sticks of 64Mb ram. The sys bus operates at 66Mhz...

What voltage do I set the RAM at? I'm allowed 5V and some other lower voltage. Is there a reference I be checking on the RAM (I didn't see any)?

-Reader

 

[Rafael]

Well, for SDRAM normaly is 3.3 Volts.
I dont know if its different for PC100, PC133 and PC66.
But its 3.3 V.

Raf

 

[CurtOien]

To the best of my knowledge some PC66 is 5V and some is 3.3V
One of my machines has PC66 @ 5V and I ran some PC100, which should be 3.3V, in it with no troubles. But, I did not do it for more than a few days.

 

[thereaderrabbit]

Thanks for the input!

I guess I'll try 3.3V first, then up it if I'm having issues.

-Reader