What type of wrench to remove seats from my Accord?

[Mojoed]

I would like to remove the seats from my 1993 Honda Accord LX in order to clean those tight spots which would otherwise be nearly impossible.

Anyone know what type/size wrench I would need to do this? I don't own any tools and would just like to buy the one I need for this job.

Thanks in advance!

 

[The Boston Dangler]

pick up a metric socket set and driver. if i had to guess, i'd say 14mm. just get the set of driver + 12 or so sockets and you're golden.

 

[AnonymouseUser]

It's 14mm.

EDIT >> When you reinstall the seats, start all 4 bolts first (finger tighten a few turns), starting with the inside front bolt. Slide the seat all the way forward and make sure the tracks are locked on both sides, tighten the rear bolts and then do the same for the front bolts.

 

[Mojoed]

Thanks for the advice and replies guys.

 

[j00fek]

i bet they are either 12 or 14mm

only thing you need to change everything on a honda is a 10,12,14,17mm to get every job done

 

[NutBucket]

Except the 32mm (IIRC) that you'll need to remove the axle nuts