what settings to use for this mushkin ram?

[dionx]

i have this ram

link

says its cas 2-2-2, but i have no idea what those mean.

so what should i have set for the following settings when i have my cpu fsb and ram to 200fsb?

SDRAM Active Precharge Delay
SDRAM RAS to CAS delay
SDRAM RAS precharge delay
SDRAM CAS Latency

 

[HappyCracker]

all twos across the board. Pretty much all your memory timings in the BIOS can be real low. set command time to 1, and 4 way bank interleave also. Heck, you might even be able to get a cas latency of 1.5. just try it, if your OS crashes, play with the settings until it doesn't.

 

[dionx]

SDRAM Active Precharge Delay
SDRAM RAS to CAS delay
SDRAM RAS precharge delay
SDRAM CAS Latency


i set all of them to 2 and my system wouldnt do the quick memory test at startup. couldnt enter bios so i had to clear the CMOS.

anyways, i set the last three to "2" since they had values of 3, 3, 2.5 respectively. the first one however was at 8, so to go from 8 to 2 was a big jump. when mushkin refers to CAS 2-2-2, i dont think they also refer to the SDRAM Active Precharge Delay. however based on the other specs being at 2, what should teh SDRAM Active Precharge Delay be?

 

[bgeh]

i believe you should put 2-2-2-5
try it