What Is the Temp Of Your XP Chips????

[Darthmayxj]

Just upgraded my rig from 1.4 T-Bird To Xp 1900+. Temp In Windows With HeatSink and fan that came in AMD box is 107 F. Case Temp Is 73F.
Is this A pretty good Temp??

 

[Mikewarrior2]

Regarding the Thread Title: Depends on very many factors, such as case temp and heatsink and thermal compound, and the one factor you forgot to post: motherboard.

The motherboard alone really is the deciding factor in temp readings with the majority of AMD Chips and Motherboard combinations.



Mike

 

[manwithplan]

using a very pants hsf and a case with v.bad airflow im currently sitting at 113f(45c) chip temp at idle-ish. Its on a Soltek sldrv4 mobo and isnt overclocked at all.

Gonna be getting a new hsf and case soon, once i get paid

c.

 

[Migroo]

My 1700+ running at stock speed at 100% load runs at 55 deg. C

HSF: Zalman flower @ lowest setting
Motherboard: Gigabyte Ga-7VTXH (Via KT266a)

 

[Jman13]

My XP 1700+ @1800+ (140FSB) runs between 48-52C depending on the temp in my apartment, with the retail HSF. It's gotten as high as 55C, on a really hot day (it was 92F here a few weeks ago) when the AC wasn't working. Those are all 100% load temps. I've never had a stability problem with that. I may OC more, but I'm going to wait a while and get an AX-7 to keep it cooler before I go any further.

Jman

 

[DukeChestnut]

when i use low setting on my 7+ i get (37c) idle, medium setting gives me (33c) idle, high setting gives me (28c BUT LOUD)

 

[BD231]

How do you convert Celsius to Fahrenheit? I remember something like 6 Fahrenheit to every 1 degree Celsius, I think that?s wrong but it went something like that, anyone know?

 

[Mikewarrior2]

C to F goes like this

9 *C /5 +32 = F


Mike

 

[SuperT]

i run my XP 1800+ at 46 C idle and up to about 50 - 51 C under load, i do have it o/c'd to be an XP 2000+ though.

 

[zodder]

My 1700+ (@1640) runs around 45* C running seti 24/7 if the room is cool. It gets into the mid 50s on hot days.

 

[CubicZirconia]

My 1800+ @1701 is currently at 32 degrees. It loads at around 36-37. This is on an epox 8kha+, so I don't know if the temps are actually correct or not.