What is req'd AGP Vlotage for VooDoo 3 v-card and can Shuttle AK11 support it?

[Herkulese]

As the title says,

What is the required AGP Voltage for a VooDoo 3 video card?

Edited: Added the following

I downloaded the AK-11 manual and I see AGP settings for 1x, 2x, 4x.
There is an AGP voltage select as well but only for the 4x mode.

I have a friend that gets Error Beeps with AK-11 and V3 and no (and i men NO) video at all.
Does this board not put out enough juice for the V3?

 

[vedin]

I would think 1.5V as it wasn't even an AGP 2X card. That and there were so few differences in it and the PCI version would make me think it didn't need 3.3Vs.

 

[Herkulese]

bump

 

[Herkulese]

Bumping Again,

 

[Tates]

Standard AGP supports 1x and 2x speeds at 3.3V and 1x, 2x, and 4x speeds at 1.5V.

Voodoo cards are AGP 1x and thus is rated at 3.3V.

The AGP slot on the Shuttle AK11 is the standard AGP 4X slot, meaning you can use any AGP 1X, 2X, or 4X card.