What fittings should i be getting.

[bleucharm28]

HEATKILLER® CPU Rev3.0 1366
HEATKILLER® Backplate 1366
http://www.sidewindercomputers.com/heatkiller1366.html
Tygon R3400 1/2in. ID 3/4in. OD Laboratory Tubing # AAE00038 5ft or so.
http://www.sidewindercomputers.com/ty1idx3odlat.html

Since l will be using Tygon R3400 1/2in. ID 3/4in. OD tubing. What fittings should I use for the CPU? There are so many fittings, it is confusing. I'm thinking that I should have one different fitting for the CPU. The water exists it way out from the CPU into the north MOS should have fittings with an angle??

And for everything else, the fittings are Bitspower Black Sparkle 1/2in. Compression Fittings for 3/4in. OD Tubing/ http://www.sidewindercomputers.com/biblsp1cofif.html I could use Nylon clamps, but I wanted something more sure and clean look to my build.

This is my first water cooling build. I'll be asking lots of noob questions

___________________________________________________________________________________
|Asus Rampage II X58 | Core i7 920 2.66 (3.2g) C0/C1-SLBCH | Corsair Dominator 6gig (DDR3 1600) | WD VelociRaptor 300 | EVGA GeForce GTX 260 Core 216 SSC Edition | Vista Ultimate 64bit | Supreme X-Fi | PC Power & Cooling S75QB 750W | Thermalright Ultra eXtreme 120 Black P/P with Noctua 120's | Dell 2408 WFP | Silverstone TJ-07 | LG H20L Blu-ray SATA |

 

[Gillbot]

I use these: http://www.sidewindercomputers.com/big1sishfifo.html
and these: http://www.sidewindercomputers.com/brmihocl7int1.html