Main System
__________________________________
Intel Pentium III Coppermine "cb0" FC-PGA @ 980 mhz at 1.75 voltage w/ Golden Orb & Abit Slotket
128 megs of Mushkin Ems Hsdram PC150 Cas 232
Soyo SY-6BA+100 Intel 440BX mobo with Onboard Highpoint HPT370 controller, featuring IDE Raid and Ultra Ata 100, 66, and 33 and Softmenu
Elsa Gladiac Geforce2 GTS @ 235/380 with 2cooltek Alpha Fin Heatsinks Attached
Sony CPD E400 19" .24 Aperture Grille Flat Screen FD Trinitron monitor
Soundblaster Live! X-Gamer EAX Soundcard
Netgear FA310TX 10/100TX Fast Ethernet NIC hooked up to 2 Way Broadband Cable Modem Access
Pioneer 16X DVD Slot Load/40X cdrom
Maxtor 30.7 GB Ultra Ata 66 7200 Rpm Hard Drive
1.44 mb 3.5" Floppy Disk Drive 🙂
Microsoft Intellimouse Explorer USB w/ Intellieye
Microsoft Natural Keyboard Pro USB w/19 hotkeys
Addtronics 7896A Full Tower ATX Case with 300 Watt Addtronics PowerSupply, and 14 YES 14! Fans including the power supply fan! 🙂🙂🙂
Altec Lansing ACS54 "Gamers" Black 4 speakers and subwoofer setup
Hardocp RatpadZ Mousepad, Generic Screws on case replaced with Kickass Gold Thumbscrews, courtesy of 2cooltek 😉 and Arctic Silver Thermal Paste Applied in a ever so delicious thin coat 😀
Cpu prolly would do 1008 mhz or so with maybe an Alpha PEP66 heatsink, which I may get. Since this sucka posts at up to 1058 🙂
System #2 On 10/100 Lan
_____________________________
Intel Pentium III Coppermine 650E @ 806 mhz 1.65 Default Voltage with Vantek P3-D5030 Heatsink/Fan
128 megs of Pc133 Sdram set @ Cas 232 w/Turbo
Abit VT6X4 Via Apollo Pro 133A Slot1 Mobo with Onboard Ultra Ata66, and Agp 4X, and Softmenu
Gainward Cardexpert Geforce2 MX 32 meg AGP
Maxtor 20.4 GB Ultra Ata 66 7200 Rpm Hard Drive
Memorex 48X max MultiRead E-IDE CDrom
1.44 mb 3.5" Floppy Disk Drive
Viewsonic G790 19" .26 DP ShadowMask CRT Monitor
Inwin Q500N-A Full Tower ATX Case with PowerMan 300 Watt Power Supply and 5 Fans total in case
Logitech Optical Wheel Mouse USB
Microsoft Internet Keyboard w/10 hotkeys
Netgear FA310TX 10/100TX Fast Ethernet NIC
Newcom 56K V.90 Isa Data Fax Modem
Soundblaster PCI512 EAX Quad Speaker Soundcard
Altec Lansing ACS33 PowerCube "white" 2 Speaker and Subwoofer Setup
Note, I already have these systems, built and ready, so I cant change anything. Most people I see have like 400-500 mhz systems with 15" monitors for a second system, so mine seems to kick enough ass to be a main system 🙂
Planned Future upgrades soon are a nice 10x4x32X IDE CDRW or whatever the highest speed is available when I get one, a 45.1 GB or 60.0 GB IBM Deskstar 75GXP 7200 rpm IDE drive as my main hd, and the 30.7 maxtor 7200 rps as a second hd, and MAYBE the kickass Klipsch Promedia Speakers. I think my ACS54's are just fine. Nothing super hardcore, but they definitly sound kickass for the price!
__________________________________
Intel Pentium III Coppermine "cb0" FC-PGA @ 980 mhz at 1.75 voltage w/ Golden Orb & Abit Slotket
128 megs of Mushkin Ems Hsdram PC150 Cas 232
Soyo SY-6BA+100 Intel 440BX mobo with Onboard Highpoint HPT370 controller, featuring IDE Raid and Ultra Ata 100, 66, and 33 and Softmenu
Elsa Gladiac Geforce2 GTS @ 235/380 with 2cooltek Alpha Fin Heatsinks Attached
Sony CPD E400 19" .24 Aperture Grille Flat Screen FD Trinitron monitor
Soundblaster Live! X-Gamer EAX Soundcard
Netgear FA310TX 10/100TX Fast Ethernet NIC hooked up to 2 Way Broadband Cable Modem Access
Pioneer 16X DVD Slot Load/40X cdrom
Maxtor 30.7 GB Ultra Ata 66 7200 Rpm Hard Drive
1.44 mb 3.5" Floppy Disk Drive 🙂
Microsoft Intellimouse Explorer USB w/ Intellieye
Microsoft Natural Keyboard Pro USB w/19 hotkeys
Addtronics 7896A Full Tower ATX Case with 300 Watt Addtronics PowerSupply, and 14 YES 14! Fans including the power supply fan! 🙂🙂🙂
Altec Lansing ACS54 "Gamers" Black 4 speakers and subwoofer setup
Hardocp RatpadZ Mousepad, Generic Screws on case replaced with Kickass Gold Thumbscrews, courtesy of 2cooltek 😉 and Arctic Silver Thermal Paste Applied in a ever so delicious thin coat 😀
Cpu prolly would do 1008 mhz or so with maybe an Alpha PEP66 heatsink, which I may get. Since this sucka posts at up to 1058 🙂
System #2 On 10/100 Lan
_____________________________
Intel Pentium III Coppermine 650E @ 806 mhz 1.65 Default Voltage with Vantek P3-D5030 Heatsink/Fan
128 megs of Pc133 Sdram set @ Cas 232 w/Turbo
Abit VT6X4 Via Apollo Pro 133A Slot1 Mobo with Onboard Ultra Ata66, and Agp 4X, and Softmenu
Gainward Cardexpert Geforce2 MX 32 meg AGP
Maxtor 20.4 GB Ultra Ata 66 7200 Rpm Hard Drive
Memorex 48X max MultiRead E-IDE CDrom
1.44 mb 3.5" Floppy Disk Drive
Viewsonic G790 19" .26 DP ShadowMask CRT Monitor
Inwin Q500N-A Full Tower ATX Case with PowerMan 300 Watt Power Supply and 5 Fans total in case
Logitech Optical Wheel Mouse USB
Microsoft Internet Keyboard w/10 hotkeys
Netgear FA310TX 10/100TX Fast Ethernet NIC
Newcom 56K V.90 Isa Data Fax Modem
Soundblaster PCI512 EAX Quad Speaker Soundcard
Altec Lansing ACS33 PowerCube "white" 2 Speaker and Subwoofer Setup
Note, I already have these systems, built and ready, so I cant change anything. Most people I see have like 400-500 mhz systems with 15" monitors for a second system, so mine seems to kick enough ass to be a main system 🙂
Planned Future upgrades soon are a nice 10x4x32X IDE CDRW or whatever the highest speed is available when I get one, a 45.1 GB or 60.0 GB IBM Deskstar 75GXP 7200 rpm IDE drive as my main hd, and the 30.7 maxtor 7200 rps as a second hd, and MAYBE the kickass Klipsch Promedia Speakers. I think my ACS54's are just fine. Nothing super hardcore, but they definitly sound kickass for the price!
