Weird problem, windows doesnt see all my ram ?

[Iccanui]

Its wierd, ihave 2gb install, it shows in the bios, i shows in the system summery, but when i look in the task manager it seems to be paging hard after the limit, which in the general system tab is listing it as like 960mb.

A little info about my PC. Thnx for any input.

CPU-Z version 1.39
-------------------------

Processors Map
------------------------------------------------------------------------------------

Number of processors 1
Number of threads 1

Processor 0
-- Core 0
-- Thread 0


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 1
Number of threads 1 (max 1)
Name AMD Athlon 64 3000+
Codename Venice
Specification AMD Athlon(tm) 64 Processor 3000+
Package Socket 939
CPUID F.F.2
Extended CPUID F.2F
Brand ID 4
Core Stepping DH-E6
Technology 90 nm
Core Speed 1808.4 MHz (9.0 x 200.9 MHz)
HT Link speed 1004.6 MHz
Stock frequency 1800 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
max FID 9.0x
VID range 1.100V - 1.450V
K8 Thermal sensor yes
K8 Revision ID 4.2
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3




Chipset
------------------------------------------------------------------------------

Northbridge NVIDIA GeForce 6150 rev. A2
Southbridge NVIDIA nForce 410/430 MCP rev. A2
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR
Memory Size 2048 MBytes
Memory Frequency 200.9 MHz (CPU/9)
CAS# 3.0
RAS# to CAS# 3
RAS# Precharge 3
Cycle Time (tRAS) 8
Bank Cycle Time (tRC) 11
DRAM Idle Timer 16
Command Rate 2T


Memory SPD
------------------------------------------------------------------------------

DIMM #1

General
Memory type DDR
Manufacturer (ID) Nanya Technology (7F7F7F0B00000000)
Size 1024 MBytes
Max bandwidth PC3200 (200 MHz)
Part number M2U1G64DS8HC1G-5T
Serial number C10B2101
Manufacturing date Week 06/Year 06

Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
EPP no

Timings table
Frequency (MHz) 166 200
CAS# 2.5 3.0
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 7 8



DIMM #2

General
Memory type DDR
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 1024 MBytes
Max bandwidth PC3200 (200 MHz)
Part number VS1GB400C3
Serial number 3A0013F0

Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
EPP no

Timings table
Frequency (MHz) 166 200
CAS# 2.5 3.0
RAS# to CAS# delay 3 3
RAS# Precharge 3 3
TRAS 7 8





This is the general tab display.

http://img74.imageshack.us/my.php?image=systemtabsf9.jpg

 

[CDC Mail Guy]

Shared RAM for video output? Maybe one of them isn't seated properly? IDK??? 🙂

 

[Iccanui]

ha, that was it. It was sharing the memory with the onboard video thats not being used. Some how sharing it limits it to 1gb. i turned it off and it told me i had 1gb then found a pci memory controler. Rebooted and now i have 2gb.

your a genius sir ! 🙂

 

[CDC Mail Guy]

Really? Damn, that was just a guess! Glad I could help 🙂

 

[Lord Evermore]

That's...odd. There's no reason I can think of that it would disable a second gigabyte just due to having memory sharing turned on. It was obviously using 64MB for the video (960+64=1024). I also don't see why it would suddenly find another memory controller.

What mainboard is this?

 

[jackschmittusa]

He may have reset the "AGP apreture" and gotten the ram back. Had an Asrock board do that to me. Set it at 256mb, and 1 mb ram would not show up in Windows. Changed it 64mb, viola! 2mb in Windows.