good evening!
I have the following weird problem going on on two setups
1-
CPU :AMD Phenom 965
MOBO : Asus M4n98TD EVO
RAM : Corsiar 8GB DDR3
PSU : Corsair CS500
2-
CPU : Intel Core i7 920
MOBO : Gigabyte EX-58 UD4P
RAM : Corsair 12GB DDR3
PSU: Cooler Master Silent PRO 700
in both cases: windows 7 X64
latest AMD drivers 12.10
even tested with beta amd drivers (clean install).
both systems run stock; no bios tweaking, no overclocking.
when de computer starts, the GPU fans spin up, up to 100% for a few seconds and quiet down right afterwards.
when running Furmark at native screen resolution 1680 x 1050
the fans go at it @ 100% and the temps rise to 85+ within 3 minutes.
running the same card in my system:
CPU : C2Q @ 3.6Ghz
MOBO: Gigabyte GA-X48-DQ6
Ram: OCZ Reaper DDR2 8GB
PSU: Corsair 1200
in both Windows 7 and Win8 X64
@ startup the fans start up quietly.
running the furmark @ the same resolution brings me
81C after 8 minutes and it stays that way
fans run @ 71%
what make the same card run rampant on
1- a system which is clock by clock slower then my C2Q?
2- a system which surpasses my system easily?
does anyone have an idea to why the same card runs just fine on my system and not in other systems?
please help....
I have the following weird problem going on on two setups
1-
CPU :AMD Phenom 965
MOBO : Asus M4n98TD EVO
RAM : Corsiar 8GB DDR3
PSU : Corsair CS500
2-
CPU : Intel Core i7 920
MOBO : Gigabyte EX-58 UD4P
RAM : Corsair 12GB DDR3
PSU: Cooler Master Silent PRO 700
in both cases: windows 7 X64
latest AMD drivers 12.10
even tested with beta amd drivers (clean install).
both systems run stock; no bios tweaking, no overclocking.
when de computer starts, the GPU fans spin up, up to 100% for a few seconds and quiet down right afterwards.
when running Furmark at native screen resolution 1680 x 1050
the fans go at it @ 100% and the temps rise to 85+ within 3 minutes.
running the same card in my system:
CPU : C2Q @ 3.6Ghz
MOBO: Gigabyte GA-X48-DQ6
Ram: OCZ Reaper DDR2 8GB
PSU: Corsair 1200
in both Windows 7 and Win8 X64
@ startup the fans start up quietly.
running the furmark @ the same resolution brings me
81C after 8 minutes and it stays that way
fans run @ 71%
what make the same card run rampant on
1- a system which is clock by clock slower then my C2Q?
2- a system which surpasses my system easily?
does anyone have an idea to why the same card runs just fine on my system and not in other systems?
please help....
Facebook
Twitter