I currently live in japan and bought a new case for my rig. This case has a display that is powered by a plug i never seen before.
The plug is a 3-pin molex plug. The problem arises when i changed powersupplies, i installed an antec 500W PSU and removed the old JSP-tech switching mode PSU 400W (ATX-400 JSP) form the case. The antec doesnt have this cable. I tried to splice the old conector from the old power supply to the new one, but the new one doesnt have the cables with the right power to do this. I was wondering if there was a sort of converter from 3 pin molex to 4 pin molex females (one that can connect to the current molex in my new PSU).
ok this is a sorta of drawing of the 3 pin molex:
_____
|0 0 0`|
sorry for it been so rustic, not an artist here. It comes from the PSU. I needed to plug the oposite or female side( the one that goes to the display) to one of the 4 pin molex plugs that goes to the PSU.
I tried searching on the website of the PSU maker with no joy. Checked online but no joy neither.
I forgot to add: It has the wires in this order in reference to drawing:
Purple wire - +5VSB 2.0A
Black wire - common ground, return
Red wire - +5VDC 28A
The plug is a 3-pin molex plug. The problem arises when i changed powersupplies, i installed an antec 500W PSU and removed the old JSP-tech switching mode PSU 400W (ATX-400 JSP) form the case. The antec doesnt have this cable. I tried to splice the old conector from the old power supply to the new one, but the new one doesnt have the cables with the right power to do this. I was wondering if there was a sort of converter from 3 pin molex to 4 pin molex females (one that can connect to the current molex in my new PSU).
ok this is a sorta of drawing of the 3 pin molex:
_____
|0 0 0`|
sorry for it been so rustic, not an artist here. It comes from the PSU. I needed to plug the oposite or female side( the one that goes to the display) to one of the 4 pin molex plugs that goes to the PSU.
I tried searching on the website of the PSU maker with no joy. Checked online but no joy neither.
I forgot to add: It has the wires in this order in reference to drawing:
Purple wire - +5VSB 2.0A
Black wire - common ground, return
Red wire - +5VDC 28A
nobody has an idea, even a single link to somewhere that may tell me what to do?
Facebook
Twitter