i thought watercooling would be a breeze thou not dificult u get ur kit in the mail and take a look at it and get perplexed so i felt i should post what i learned and was told by the techs at danger den (great tech support by the way). first of all here is the basic layout of a good system using a fillport no resevoir.
water pump outlet to radiator (either nozzle is ok unless ur radiator shows inlet and outlet mine didnt)
radiator outlet to cpu block inlet (yes it does matter inlet is the one centered to the cpu)
cpu outlet to (if u have any other cpu, gpu, hardrive cooler blocks daisy chain them here)
outlet from last waterblock to T-splitter (locate splitter next to pump inlet) line goes to dangerden fillport
secure the T-splitter to water pump outlet and there you have it
note no resevoir is needed if you use the danger den fillport with a long tube from top of case to pump that works great and makes it easy to fill and bleed the air out. make sure u bleed all the air out u can it hinders performance.
please if u can afford it please get urself some FLUID XP+ it is nonconductive (i tested it by pouring it into a light socket and screwing the bulb in worked great!) the techs at danger den are gonna test if you can drop a couple of green dye lite into it and be safe ill post results of that in a couple of days i just bought colored uv tube instead.
length of tubing should be kept as short as possible WITHOUT KINKING IT so no fancy pretzels or loop de loops
water pump outlet to radiator (either nozzle is ok unless ur radiator shows inlet and outlet mine didnt)
radiator outlet to cpu block inlet (yes it does matter inlet is the one centered to the cpu)
cpu outlet to (if u have any other cpu, gpu, hardrive cooler blocks daisy chain them here)
outlet from last waterblock to T-splitter (locate splitter next to pump inlet) line goes to dangerden fillport
secure the T-splitter to water pump outlet and there you have it
note no resevoir is needed if you use the danger den fillport with a long tube from top of case to pump that works great and makes it easy to fill and bleed the air out. make sure u bleed all the air out u can it hinders performance.
please if u can afford it please get urself some FLUID XP+ it is nonconductive (i tested it by pouring it into a light socket and screwing the bulb in worked great!) the techs at danger den are gonna test if you can drop a couple of green dye lite into it and be safe ill post results of that in a couple of days i just bought colored uv tube instead.
length of tubing should be kept as short as possible WITHOUT KINKING IT so no fancy pretzels or loop de loops
Facebook
Twitter