• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Wanting to upgrade...

Slufa111

Senior member
2500k @ 4.7ghz @ 1.36v 24/7
ASRock Z68 Extreme3 Gen3
CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
Crucial M4 CT128M4SSD2 2.5" 128GB SATA III
COOLER MASTER Hyper 212 EVO
SAPPHIRE 100312-3SR Radeon HD 6950
CORSAIR Enthusiast Series TX750 V2 750W
COOLER MASTER HAF 912


I know it is kind of pointless to get rid of the SB processor and the motherboard has been a very very reliable one. I was thinking of adding a second SSD in Raid to up my access speed and overall performance. Another idea was upgrading the case because for some reason the 912 is a dust magnet. lol

I was also thinking going fanless, any good watercooling solutions? I like to build them myself so none of those closed loop suggestions please 🙂

Thanks again!
 
I don't think you'd actually notice an improvement by RAIDing two SSDs. Those improvements are mostly synthetic as far as I've seen, not to mention you'd then have to reinstall everything and you increase the chance of failure.

I guess watercooling could be a logical step for you since you are pushing your OC reasonably far. How loud is your current setup? Does the noise bother you?
 
My current setup isn't loud at all but I can push this chip to 4.9ghz @ 1.4 I just need extra cooling. Not to mention its a great adventure to get up!!!
 
HEATKILLER® CPU Block Rev3.0 Ni-BL - Socket 1155/1156 - Black Nickel
HEATKILLER® Backplate Socket 1156 / 1155 - # 10012
Swiftech MCP655-B 12v DC Watercooling Pump w/Tach Sensor
StealthRes 175 Multi-Option Reservoir - Exclusive White Endcaps
Tygon R3603 1/2in. ID 5/8in. OD Laboratory Tubing (AAC00036)
Enzotech Silver Shining High Flow 1/2 in ID Barb (HF-G1/4-12)
Swiftech MCR220-QP Quiet Power 2X120mm Radiator - Matte Black
Hose Clamp - Herbie Clip Nylon Size D - White

How does everything look? I did as much research as possible. Any input?

I am looking to improve cooling mainly and have a good hobby.
 
Doing a custom loop can be fun, and it is a great hobby and safe, VS taking your crotch rocket on the highway for a 150mph joy ride.

There is a cooling section you can bring this up on. The expert H20 cooling guys usually hang out around there. Now and then, some guy with a big head comes around the general hardware section and throws out vague suggestions and then usually brags about his rig then goes and hides back in the h20 section.. good luck with that guy, pfff
 
There is a cooling section you can bring this up on. The expert H20 cooling guys usually hang out around there. Now and then, some guy with a big head comes around the general hardware section and throws out vague suggestions and then usually brags about his rig then goes and hides back in the h20 section.. good luck with that guy, pfff

Paging aigo...
 
Back
Top