Want a socket A overclocker mobo for my Mobile2400

[Toro 45]

Needs to have at least 2.9-3.0 vdimm, I have some nice Mushkin PC3500 ram but can't push it high enough on my shuttle's max 2.7vdimm, also cpu voltage at least 1.95v

 

[Shimmishim]

dfi infinity ultra...

core up to 2.0
mem up to 3.2

you could always voltmod that shuttle

 

[oldman420]

Originally posted by: Shimmishim
dfi infinity ultra...

core up to 2.0
mem up to 3.2

you could always voltmod that shuttle

Yes that is the fastest 32 bit socket a board.

But I went through 4 of them trying to get a good one They all killed the mbr on my hdd's.

But while they ran they went as high as 2.5 ghz on air.

 

[Toro 45]

Yeah, the dfi infinity looks like the best board but I'm trying to stay around $75.00 max. Can you tell me more about the voltmod for my shuttle?

 

[Toro 45]

What about the NF7-S does it have the higher VDimm volts that I'm looking for?

 

[PumpActionWalrus]

Originally posted by: Toro 45
What about the NF7-S does it have the higher VDimm volts that I'm looking for?

Goes up to 2.9, but with a 3 minute mod you can have 3.3

 

[Toro 45]

Originally posted by: PumpActionWalrus

Originally posted by: Toro 45
What about the NF7-S does it have the higher VDimm volts that I'm looking for?

Goes up to 2.9, but with a 3 minute mod you can have 3.3

Would that be the same mod that Shimmishim was refering to on my Shuttle?

 

[Shimmishim]

Originally posted by: PumpActionWalrus

Originally posted by: Toro 45
What about the NF7-S does it have the higher VDimm volts that I'm looking for?

Goes up to 2.9, but with a 3 minute mod you can have 3.3

3 minute mod?

are you talking about installing a booster?

cuz a voltmod with a VR takes longer than 3 minutes because the abit nf7-s vmem mod requires you to remove a resistor on the board then solder to that tiny pad.

i've done it... but it was a pain...

as for the shuttle vmod...

i'll see what i can find

 

[Shimmishim]

i assume you have a shuttle an35n

http://www.xtremesystems.org/f...33&highlight=an35n

 

[Toro 45]

Yes, AN35N. Thanks for the link, I'll check it out.