VTEC vs i-VTEC

[kzrssk]

Yep, lol.

Thanks,

 

[shoRunner]

http://en.wikipedia.org/wiki/VTEC#i-VTEC

 

[Eli]

I'm not 100% sure, but .. going on inference alone..

I would assume that regular VTEC just has a set RPM that it engages, and i-VTEC can be somehow controlled via the engine's computer. Most likely engagement RPM, but maybe duration/lift too?

Now I'll go look and see how close I was.. lol

 

[OS]

for i4s, basically ivtec adds a cam phasing sprocket on the intake cam.

 

[imported_Scourge]

VTEC= Very Tall Engine Coolant

iVETEC= inline Very Tall Engine Coolant

 

[heelside23]

 

[Eli]

Originally posted by: shoRunner
http://en.wikipedia.org/wiki/VTEC#i-VTEC

Hmm, interesting.

Valve lift and duration are still limited to distinct low and high rpm profiles, but the intake camshaft is now capable of advancing between 25 and 50 degrees (depending upon engine configuration) during operation. Phase changes are implemented by a computer controlled, oil driven adjustable cam gear. Phasing is determined by a combination of engine load and rpm, ranging from fully retarded at idle to maximum advance at full throttle and low rpms. The effect is further optimization of torque output, especially at low and midrange RPMs.

In 2004, Honda introduced an i-VTEC V6 (an update of the venerable J-series), but in this case, i-VTEC had nothing to do with cam phasing. Instead, i-VTEC referred to Honda's cylinder deactivation technology which closes the valves on one bank of (3) cylinders during light load and low speed (below 80 mph) operation. The technology was originally introduced to the US on the Honda Odyssey, and can now be found on the Honda Accord Hybrid and the 2006 Honda Pilot. An additional version of i-VTEC was introduced on the 2006 Honda Civic's R-series four cylinder engine. This implementation uses very small valve lifts at low rpm and light loads, in combination with large throttle openings (modulated by a drive-by-wire throttle system), to improve fuel economy by reducing pumping losses.

With the continued introduction of vastly different i-VTEC systems, one may assume that the term is now a catch all for creative valve control technologies from Honda.