I am trying to establish a site to site VPN from a Dlink DI 824VUP to a SonicWall Pro 230. Thus far, if both sides have static IP, I can do so succesfully using IKE Group2/3DES/SHA1 for Phase 1 and ESP/DES/HMAC/MD5 for Phase 2. Using this static setting as a base, I tried to establish a connection with Dlink using a dynamic IP Address with aggressive mode, but failed.
The logs on the SonicWall stats that phase 1 proposal was mismatched. As far as I understood, Sonicwall required a Unique Identifier for the aggressive mode to work correctly. For Linksys, the correct Unique Identifier is the MAC Address of the router (I don't remember the WAN or the LAN port). However, I can not find out what the correct Unique Identifier should be on the Dlink side. If anyone has any idea, please let me know.
For those of you who will ask why I am doing this and suggest different setup, this is why I choose this specific equipment. We are trying to set up our users with a home setup that is seperate from their home computer. Our work has determined that the best setup will be a winterm (RDP to our terminal server) with a printer. The DI-824VUP device allows for
With this setup, it'll allow us to assigne a /30 to each users home and be able to setup a printer port on TS that goes to the Tunnel address of the DI824 that'll let them hook up a printer of their choice. This is why I am looking at this device. If there are others out there in the market that'll do the job better, please advice.
Thanks
The logs on the SonicWall stats that phase 1 proposal was mismatched. As far as I understood, Sonicwall required a Unique Identifier for the aggressive mode to work correctly. For Linksys, the correct Unique Identifier is the MAC Address of the router (I don't remember the WAN or the LAN port). However, I can not find out what the correct Unique Identifier should be on the Dlink side. If anyone has any idea, please let me know.
For those of you who will ask why I am doing this and suggest different setup, this is why I choose this specific equipment. We are trying to set up our users with a home setup that is seperate from their home computer. Our work has determined that the best setup will be a winterm (RDP to our terminal server) with a printer. The DI-824VUP device allows for
- site-to-site VPN
- USB/Parallal print server, printer redirect with winterm is a not something we want to do
- Mac Address Limitation on LAN
With this setup, it'll allow us to assigne a /30 to each users home and be able to setup a printer port on TS that goes to the Tunnel address of the DI824 that'll let them hook up a printer of their choice. This is why I am looking at this device. If there are others out there in the market that'll do the job better, please advice.
Thanks
Facebook
Twitter