voltage oc and hardware monitor???

[Duvie]

I notice that if I set the bios to 1.6v and it is added to about the .11 or .12v the asus board is delivering with the power booster jumper enabled on the board that I can boot into fine and even run processor for 8 hours stable, but if I restart the board will give an error has been found in hardware monitor...press f1 or del...etc...


1.6v bios boosted to 1.71-1.72v @ 138fsb = 2.484ghz = stable (but get error) 48c load

1.575v bios boosted to 1.69.170v @ 136fsb = 2.5ghz = stable (no error)


Is there a automatic protection enabled when bios detects voltage over 1.7v??? Can this be disabled???

 

[THUGSROOK]

mine dont do that Duvie - even upto 1.85v.

disable halt on error in bios?
set it to "halt on: no errors"

 

[Metalloid]

Where do you disable the power booster on an Asus A7V266?