VOLATAGE ON A M2N-E

[DFLO00]

I HAVE THE FOLLOWING
AMD 5200
ASUS M2N-2 MOTHERBOARD
PATRIOT RAM 1024
I HAVE BEEN TRING TO OVER CLOCK HOW EVER IT NEVER RUNS STABLE.
SOME PEOPLE SAY IT IS BECAUSE THE RAM NEEDS TO BE RUNNING AT 2.2 VOLTAGE AND THE BOARD CURRENTLY ONLY GOE'S TO 1.95

COULD SOMEONE PLEASE INSTRUCT ME ON HOW TO INCREASE THAT VOLTAGE.

THANKS

 

[Quiksilver]

Locate the caps lock key and press it so that it turns off.

Then give us the exact model of the patriot memory. So we may verify this information.

 

[DFLO00]

Patriot Signature 1GB (2 x 512MB) 240-Pin DDR2 SDRAM DDR2 667
Model #: PSD21G667KH

 

[Quiksilver]

I don't know who or what told you, but that memory is meant to be ran at 1.8v

According to this website:
http://ramlist.ath.cx/ddr2/

...and

Newegg:
http://www.newegg.com/Product/...Item=N82E16820220070&T

...and

Patiot's Website:
http://www.patriotmem.com/products/specs/PSD21G667K.pdf

In other words, set your ram 1.8v and carry on. No need to increase the voltage.

 

[DFLO00]

So how would you over clock this combination?