Visiontek Geforce2 5632 GTS-V and W6BXA?

[NytOwl]

Will the following motherboard run a Visiontek Xtasy Geforce2 5632 GTS-V?

Wintec/Edom W6BXA
BIOS: Award Software 4.51PG 07/21/98
Bios String: 07/21/98-i440bx-w977tf-2a69kw09c-02
Pentium II 350
256MB of Crucial 133

Current Graphics Card:
Card name: S3 Inc. Trio3D/2X (Engineering Release)
Manufacturer: S3
HdwRevision: 002
Chip type: Trio3D/2X Rev C
DAC type: Internal
Display Memory: 3.5 MB (called 4MB card)
Driver Name: s3lc2x.drv
Driver Version: 4.11.01.5001 (English)
Driver Date/Size: 2/24/1999, 145456 bytes
Device ID: 0x8A13

( Don't know if the AGP slot is 1X or 2X, hope someone owns a W6BXA or has a manual )

Thanks,

NytOwl

 

[NytOwl]

May have found the manual which says....

"One AGP port with up to 133MHz data transfer capability."

Does that mean the W6BXA is compliant with the AGP 1.0 standard ?

(The AGP 1.0 Standard Slot is capable of AGP 1X, 2X transfers, Direct Memory Execution Texturing, and Sidebanding.)

The Xtasy 5632 description say it's 4x/2x but the specs say 4x, will it run in an AGP 1.0 Standard Slot at 2x ?

Thanks NytOwl

 

[eplebnista]

Yes, the Xtasy GTS-V 5632 will run at 2x. I have recently installed one in an Abit BE6(circa '99 AGP 1.0 board), and it has been running just fine with no problems.

hth,
eplebnista

 

[NytOwl]

Thanks eplebnista, that helps a lot.

NytOwl