• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Venice + XP-90 temps under load?

A

Abunai

Member
Looking for some temp comparisons with this heat sink/cpu combo. I have a 3500+ OC'd to 2.7ghz using 1.5 vcore, Prime Stable.

Im using a Panaflo 48cfm fan for the XP and my case has two 120mm fans for intake and exhaust. Peak temp with Prime95 Small FFT is 53c. Idle hovers around 36c. Using 1.5v it taps out at 2750 three minutes into Prime. The jump from 1.4 to 1.5 netted me a 100mhz gain, but Im a little wary about trying 1.55v with the current temps.
 
Seems very good to me..

I run with a 92MM Zalman about 50CFM (2800rpm)

1.56vcore Temps @54-55C never goes above.. Fan typically runs @ 2400 rpms..

If my case cover is off, I can pull about 51-53C loaded..

I am PERFECTLY fine with 55C.
 
Mine idles at 35C on a hot day, 32C when it's 60F out. The hottest I've ever seen it at was 46C, and that was when it was like 80F in my room. It's a A64 3200+ Venice at 2.6Ghz with 1.52 volts running through it. I have an XP-90 with a high-powered 90mm Panaflo Fan.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top