USB Hub Specs

[okb]

I've got a USB hub (Cicero SU-104 4 port hub, not USB 2.0) but over the last several months we've moved a fair amount. As a result the adapter that came with the hub has gotten mixed in with other adapters. There are a few that will fit it, but all with different power specs. I'm wondering if anyone has this same hub or knows what the adapter should have for power output?

PS Yes I know I could upgrade for cheap.

TIA

 

[ScottMac]

The couple that I have are 5volt DC, one supply is rated at 2.5 amp (it's for a 7 port USB 2.0).

Most of the time it's printed near the socket or on the label on the bottom.

Good Luck

Scott

 

[okb]

Most of the time it is. Even my DLink hub neglects to print that info on it (luckily I only have one adapter to choose from!) Aside from opening it up and looking in there, there's nothing to even hint at the specs, and it's not going to be inside it. I doubt it needs 2.5 amps, probably no more than 1000mA but like I said I've got a few adapters with the proper sized end all with different voltages/amperages. =/ Should have written Cicero on the adapter. Ah hindsight!