• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

USB 3.0 hub question

J

jkauff

Senior member
I have 8 USB 3.0 external hard drives, seven of them on a hub. The drives on the hub have slower transfer speeds than the one on a motherboard port, which is to be expected. However, when I recently added drive #8, all the hub drives suffered a significant slowdown.

Would I get better performance with fewer drives per hub? In other words, should I replace my 9-port hub with two 4-port hubs?
 
Is the hub a 3.0 one? 3.5-in drives should be powered by their own sources. 2.5-in drives can be hub powered, but may require two ports with a Y connector. We need to know the specifics of the external drives.

With that many drives, you might consider a NAS rather than a hub.
 
in a ideal arrangement, (all drives self powered, hub is usb 3.0 ect) then it should only slow down when you are using multiple drives at a once. If using one drive or another then it should not be any noticeable slow down.

As to using two hubs instead of one large one, it might help, but it depends on the ports on your computer. Some computers use a internal hub to offer multiple USB3 ports so even with multiple hubs, they all still get restricted to a single USB3 controller, so no speed benefit for the same utilization you are currently using.

Also, USB was designed to use CPU power to work, so a slow CPU could cause issues in USB performance as well.
 
greenhawk said:
in a ideal arrangement, (all drives self powered, hub is usb 3.0 ect) then it should only slow down when you are using multiple drives at a once. If using one drive or another then it should not be any noticeable slow down.
Click to expand...
These drives are all used for archives and backup of the archives. The slowdown is in drive-to-drive transfers, and it doesn't matter if I'm copying between the externals or from a SATA3 internal drive (the most common scenario).

I asked the question because of the global slowdown when I added the new drive. Can a hub be over-driven?
 
Last edited:
You must log in or register to reply here.

TRENDING THREADS

Back
Top