• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

*Urgent*Epox 8KHa+ /w Athlon XP 1600+ no bootup

J

jl123

Member
I can't get this box to boot up. I just finish putting it together. I have Mushkin PC2100 DDR (512MB stick) RAM and it says it's not reconizing it. There is no video. On this board there is a LED display that tells you what process it is in of the bootup process. It stops at C1 which is "Detect Memory". I've reseated the memory many times with no luck.
 
What do you mean there's no video?


Have you tried resitting the RAM in the other 2 slots of on the mobo? Try that. If you have and no luck, you could try to reset the CMOS. Still no luck? then get some other RAM.
 
I've seen alot of posts concerning the pressure needed to seat the ddr memory. In everyone of them, the user hadn't seated it far enough. Make sure that it's seated all the way down and that the clips on each end have "clicked" into place. Also I've seen posts where the user had the memory spun 180 degrees ( how he did it I haven't a clue). Not to say you're not doing it right, but make sure the slot on the memory is lined up correctly.
 
I seated it right. Tried all 3 slots. I borrowed a friend's memory for a few minutes and it booted up. Now I gotta send the ram back to newegg and get a replacement. Thanks for the help

~Joel
 
That sucks, but at least you got the problem isolated. Maybe the type of ram you bought is incompatible with your motherboard and you should try buying a different type to be on the safe side, although it's probably just a bad stick of ram. You never know though.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top