• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Unknown Hardware problem

tweeve2002

Senior member
I know this has to be hardware. but the system is running just about perfect. besides having almost no hard drive space. All I know is when EVEREST Home Edition runs the hardware scan the system bluescreens. Unfortunily it dose not tell me what hardware crashed so I cant fix it, and whe I do get back into windows, It dosnt do the crash report so I cant check that way either. It is draving me nuts. I want run some hardware monitoring software but most of them crash the computer.

Any help they to find out what is crashing it would be great.

System specs:
CPU: P4C 3.0Ghz
RAM: 1GB Musken PC4000
PSU: PC Power and Cooling 850W
Video: XFX 128MB 6600GT
Sound: Audigy 2
RAID 1: 2x WD 120GB, RAID 0 config, on the build in VIA RAID
RAID 2: 2x WD 80GB, RAID 0 config, on addin Highpoint RAID card
RAID 3: 2x Seagate 300GB, RAID 0, on the build in INTEL RAID
RAID 4: 2x Seagate 500GB drives, each set as a RAID 0, so it shows up as 2 drives NOT 1
System heat monitor by MBM5 - CPU 30C, CASE 32C
MBM5 is the only monitoring software that works without crashing.

Voltages: All voltages are monitored though MBM - System has been running sence sunday.
3.3 Volt - Current 2.94, High 3.14, Low 2.78, Average 3.1
5 Volt - Cuttent 5.00, High 5.05, Low 4.92, Average 4.99
12 Volt - Current 11.98, High 12.16, Low 11.80, average 11.96

Note: one of the 300GB Seagates is acting up. It has a hard time starting and makes a clicking noise when starting but once it started runs fine. I am in the process of burning all the data off the 600GB RAID on to DVD so I can split the RAID into 2 drives so when one drive dies I dont lose a ton of ingo.
 
So nothing else crashes except everest?

Have you tried reinstalling everest?

How about other software that does scans ?? ie: 3dmark05, cpu-z

 
3dmark06 crashes. The other main program that I use to use wsa Asus AI booster, to do some overclocking, but I havent overclocked in a long time due to these confilicts. The AI booster started bluescreaning to at odd times. I have tired man time to get evverst to work, reinstalling dosnt help.

Also Speedfan can Make the system Bluescreen when it does its hardware scan.
 
hmm...

Can you pass 8 hour prime95 ok?

I would recommend reinstalling windows, seems like a possible corrupt windows install to me. Can't really think of anything else that can cause this type of problem.
 
Back
Top