UD3 Bios Template

[BTRY B 529th FA BN]

This is a template for those wishing to overclock on their UD3 motherboards that need help.

These are not my settings nor any guide, just a template for when asking questions

Cheers

Robust Graphics Booster.....................[ Auto ]
CPU Clock Ratio.............................[ 8 ]
Fine CPU Clock Ratio........................[ 0.5 ]
CPU Frequency 4.0GHz........................[ 471*8.5 ]

******Clock Chip Control******

CPU Host Clock Control......................[Enabled ]
CPU Host Frequency (Mhz)....................[471 ]
PCI Express Frequency (Mhz).................[100 ]
C.I.A 2.....................................[Disabled]

******DRAM Performance Control******

Performance Enhance.........................[ Turbo ]
Extreme Memory Profile (XMP)................[Disabled]
(G) MCH Frequency Latch.....................[ 333MHz ]
System Memory Multipler.....................[ 2.40b ] (1130 DDR2)

DRAM Timing Selectable......................[ Manual ]

CAS Latency Time............................[ 6 ]
tRCD........................................[ 6 ]
tRP.........................................[ 6 ]
tRAS........................................[ 18 ]

******Advanced Timing Control******

tRRD........................................[Auto ]
tWTR........................................[Auto ]
tWR.........................................[Auto ]
tRFC........................................[Auto(52)]
tRTP........................................[Auto ]
Command Rate (cmd)..........................[Auto ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled]
CPU Vcore [ 1.25 ]...............[ 1.3500 ] (1.328 CPU-Z)
CPU Termination [ 1.20 ]...............[ 1.36 ]
CPU PLL [ 1.50 ]...............[ 1.570 ]
CPU Reference [ 0.766 ]...............[ 0.901 ]

MCH Core [1.1 ]...............[ 1.36 ]
MCH Reference [0.760 ]...............[ 0.941 ]
MCH/DRAM Refernce [0.900 ]...............[ Auto ]
ICH I/O [1.500 ]...............[ Auto ]
ICH Core [1.100 ]...............[ Auto ]

DRAM Voltage [1.800 ]...............[ 2.1 ]
DRAM Termination [0.900 ]...............[ Auto ]
Channel A Ref [0.900 ]...............[ Auto ]
Channel B Ref [0.900 ]...............[ Auto ]

******Advanced BIOS Features******

CPU Multithreading..........................[ Disabled ]
Limit CPUID Max to 3........................[ Disabled ]
No-Execute memory Protect...................[ Disabled ]
CPU Enhance Halt (CIE)......................[ Disabled ]
C2/C2E State Support........................[ Disabled ]
C4/C4E State Support........................[ Disabled ]
CPU Thermal Monitor.........................[ Enabled ]
CPU EIST Function...........................[ Disabled ]
Virtualization Technology...................[ Disabled ]
__________________

 

[spinejam]

here are my updated settings (lowered voltages)

UD3P (F9b Bios): 5+ Hours PS-Blend / LinX (Max Mem) 20X Stable
Q9550 E0 (L835B166) pack date: 11/11/2008

Robust Graphics Booster.....................[ Auto ]
CPU Clock Ratio.............................[ 8 ]
Fine CPU Clock Ratio........................[ 0.5 ]
CPU Frequency 4.0GHz........................[ 471*8.5 ]

******Clock Chip Control******

CPU Host Clock Control......................[Enabled ]
CPU Host Frequency (Mhz)....................[471 ]
PCI Express Frequency (Mhz).................[100 ]
C.I.A 2.....................................[Disabled]

******Advanced Clock Control******

CPU Clock Drive.............................[ 1000mv ]
PCI Express Clock Drive.....................[ 1000mv ]
CPU Clock Skew..............................[ 0ps ]
MCH Clock Skew..............................[ 50ps ]

******DRAM Performance Control******

Performance Enhance.........................[ Turbo ]
Extreme Memory Profile (XMP)................[ Disabled]
(G) MCH Frequency Latch.....................[ 333MHz ]
System Memory Multipler.....................[ 2.40b ]
Memory Frequency (Mhz) .....................[1130 DDR2]

DRAM Timing Selectable......................[ Manual ]

CAS Latency Time............................[ 6 ]
tRCD........................................[ 6 ]
tRP.........................................[ 6 ]
tRAS........................................[ 18 ]

******Advanced Timing Control******

tRRD........................................[Auto ]
tWTR........................................[Auto ]
tWR.........................................[Auto ]
tRFC........................................[Auto(52)]
tRTP........................................[Auto ]
Command Rate (cmd)..........................[Auto ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled]
CPU Vcore [ 1.25 ]...............[ 1.3500 ] (1.328 CPU-Z)
CPU Termination [ 1.20 ]...............[ 1.28 ]
CPU PLL [ 1.50 ]...............[ 1.500 ]
CPU Reference [ 0.760 ]...............[ 0.835 ]

MCH Core [1.1 ]...............[ 1.32 ]
MCH Reference [0.760 ]...............[ 0.850 ]
MCH/DRAM Refernce [0.900 ]...............[ 1.000 ]
ICH I/O [1.500 ]...............[ 1.500 ]
ICH Core [1.100 ]...............[ 1.100 ]

DRAM Voltage [1.800 ]...............[ 2.1 ]
DRAM Termination [0.900 ]...............[ 1.000 ]
Channel A Ref [0.900 ]...............[ 1.000 ]
Channel B Ref [0.900 ]...............[ 1.000 ]

******Advanced BIOS Features******

Limit CPUID Max to 3........................[ Disabled ]
No-Execute memory Protect...................[ Disabled ]
CPU Enhance Halt (CIE)......................[ Disabled ]
C2/C2E State Support........................[ Disabled ]
C4/C4E State Support........................[ Disabled ]
CPU Thermal Monitor.........................[ Enabled ]
CPU EIST Function...........................[ Disabled ]
Virtualization Technology...................[ Disabled ]

 

[BTRY B 529th FA BN]

lol, i think you were the one who's template I used from XS

 

[spinejam]

Originally posted by: BTRY B 529th FA BN
lol, i think you were the one who's template I used from XS

np.

i found another one over there too which helped me lower the juices!

 

[BlahBlahYouToo]

nice, i'll be needing this for my UD3R.

 

[BTRY B 529th FA BN]

Originally posted by: BlahBlahYouToo
nice, i'll be needing this for my UD3R.

Your welcome!

I don't know why no one has done something like this for the other boards...

p.s. i love my UD3R

 

[spinejam]

some new settings -- 500fsb! great mb!

UD3P (F9b Bios): LinX (Max Mem) 20X Stable - Yes

Q9550 E0 (L835B166) pack date: 11/11/2008

Robust Graphics Booster.....................[ Auto ]
CPU Clock Ratio.............................[ 8 ]
Fine CPU Clock Ratio........................[ 0.0 ]
CPU Frequency 4.0GHz........................[ 500*8.0 ]

******Clock Chip Control******

CPU Host Clock Control......................[Enabled ]
CPU Host Frequency (Mhz)....................[500 ]
PCI Express Frequency (Mhz).................[100 ]
C.I.A 2.....................................[Disabled]

******Advanced Clock Control******

CPU Clock Drive.............................[ 1000mv ]
PCI Express Clock Drive.....................[ 1000mv ]
CPU Clock Skew..............................[ 0ps ]
MCH Clock Skew..............................[ 50ps ]

******DRAM Performance Control******

Performance Enhance.........................[ Turbo ]
Extreme Memory Profile (XMP)................[ Disabled]
(G) MCH Frequency Latch.....................[ 333MHz ]
System Memory Multipler.....................[ 2.00b ]
Memory Frequency (Mhz) .....................[1000 DDR2]

DRAM Timing Selectable......................[ Manual ]

CAS Latency Time............................[ 5 ]
tRCD........................................[ 5 ]
tRP.........................................[ 5 ]
tRAS........................................[ 15 ]

******Advanced Timing Control******

tRRD........................................[Auto ]
tWTR........................................[Auto ]
tWR.........................................[Auto ]
tRFC........................................[Auto(52)]
tRTP........................................[Auto ]
Command Rate (cmd)..........................[Auto ]

******Motherboard Voltage Control******

Load-Line Calibration [Enabled]
CPU Vcore [ 1.25 ]...............[ 1.3500 ] (1.328 CPU-Z)
CPU Termination [ 1.20 ]...............[ 1.28 ]
CPU PLL [ 1.50 ]...............[ 1.570 ]
CPU Reference [ 0.760 ]...............[ 0.835 ]

MCH Core [1.1 ]...............[ 1.32 ]
MCH Reference [0.760 ]...............[ 0.850 ]
MCH/DRAM Refernce [0.900 ]...............[ 1.000 ]
ICH I/O [1.500 ]...............[ 1.500 ]
ICH Core [1.100 ]...............[ 1.100 ]

DRAM Voltage [1.800 ]...............[ 2.02 ]
DRAM Termination [0.900 ]...............[ 1.000 ]
Channel A Ref [0.900 ]...............[ Auto ]
Channel B Ref [0.900 ]...............[ Auto ]

******Advanced BIOS Features******

Limit CPUID Max to 3........................[ Disabled ]
No-Execute memory Protect...................[ Enabled ]
CPU Enhance Halt (CIE)......................[ Disabled ]
C2/C2E State Support........................[ Disabled ]
C4/C4E State Support........................[ Disabled ]
CPU Thermal Monitor.........................[ Disabled ]
CPU EIST Function...........................[ Disabled ]
Virtualization Technology...................[ Disabled ]

 

[bfu]

This is great. I just got a UD3P, anyone wants to share a template for Q9400? I just want it to be 3.6Ghz stable 24/7 F@H
Thanks

 

[BTRY B 529th FA BN]

Shouldn't be that hard, maybe just a little vcore increase or maybe auto will do it for ya... if you still have crashes, raise the MCH (NB) volts to maybe around 1.42v