tyan 1854c and dram clock???

[ytay]

i have a tyan trinity400 1854c motherboard, my setup is as follows:
P3-450mhz
512 pc133ram (2 slots 256meg/ea.)
winxp

When i fire up my pc i see the following:
Pentium 3 CPU (100x4.5) dram clock 66mhz

should that not read dram clock 133 mhz to match the ram and if so what changes should be made in my bios. i have tried setting the dram clock to +33 but i get a blue screen, if i set it to auto-detect it finds it as 133, but again i get the blue screen. anyone have any ideas or does it involve jumper settings

thanks

 

[oldfart]

Shouldnt the DRAM be 100 MHz to match the FSB??

 

[ytay]

hell ya got me, i just need to know where to change the settings in the bios

 

[Gnu Homeros Bagge]

Check under Advanced CMOS setup or Advanced Chipset setup. There should be a few settings for memory timing. The one you're after regards memory clock, and is probably set to FSB-33 at the moment.

Possible settings for this option are Auto, FSB, FSB-33 and FSB+33.

FSB = Front Side Bus, and is 100MHz for a P-III 450MHz CPU

Setting this to FSB+33 will get your memory up to speed.