Two dead boards

[KB]

I have had two of the same Biostar Athlon XP motherboards die on me. I boot up the system and a little yellow flame appears on the board and creates a burn spot. So is this a bad batch of boards or is there something else wrong with my hardware. The PSU (350 WATT ENERMAX) and all other components were working fine before this.

 

[Arcanedeath]

You either got pretty unlucky and had 2 bad boards or you have a PSU issue, I'd get your PSU checked out before replacing the board again, I've also had a Biostar M7NCG Pro fail on me but it didn't burn =P