TV-Out Sound

[Dubbs900]

First of all, I appoligize if this is in the wront forum, but as it relates to Video, I though this was the best choice, but feel free to move.

I have a Raedon 7500 with TV out, basic stuff. My TV dosn't have the S-video however, so I went to Radio Shack and purchased a RF Modulator. You hook up the cable to the Modulator, and then go from the Modulator to the TV, and everything is fine. Then, there are the three jacks, Yellow for Video, Red and White for Audio. I have hooked up the video, and have it all working perfectly. But I also bought a audio connector, it is your basic sound card or speaker jack on one end, then the other splits into audio plugs for the Modulator, a white one and a red one. However, I get no sound. Anyone have any ideas of how to get my computer sound playing through my tv? Windows XP.

Thanks so much for any help!!

 

[Dubbs900]

Sorry, I also have the Sound Blaster Live! card.

Thanks

 

[rbV5]

Is your souncard connected to the RF modualtor? S-video only carries video signals.

 

[Dubbs900]

Originally posted by: rbV5
Is your souncard connected to the RF modualtor? S-video only carries video signals.

Yes, sorry. I bought another connector, one end that plugs into soundcard, one end that has both the Red and White ends that connect to the audio ports on the RF modulator. I have tried plugging the end into each one of the Sound Blaster Live's connections, to no avail

 

[Dubbs900]

This link might help explain

http://www.ati.com/support/connectors/common/connecttvoutaudio.html

That setup is exactally what I have. However, no sound. But I'm guessing I am just missing somthing stupid, so any ideas would be appreciated. Thanks

 

[Viper96720]

You should have the line out from from your soundcard going to the red and white of the modulator. Maybe the line out is disabled. Have you checked the creative sound properties thing. Make sure your line out isn't muted or disabled.

 

[Dubbs900]

Originally posted by: Viper96720
You should have the line out from from your soundcard going to the red and white of the modulator. Maybe the line out is disabled. Have you checked the creative sound properties thing. Make sure your line out isn't muted or disabled.

Well, I have tried each connector of the sound card, including the line out. Now, in my windows sound properties, I have no line out option, and nothing is muted. In my Creative Surroud Mixer, again, no line out option to mute or unmute

 

[Dubbs900]

Ok, I had a friend come over and help me out, everything is working fine now Turns out, yes, I'm an IDIOT! Thanks for all the help though!