Tsunami & Intel D915PBL

[djweaver]

Thermaltake tsunami instructions are a little vague.

mic bias to mic power
mic in to mic input
gnd to ground -- this one is obvious
two "ear L" to "BLINE_OUT_L and "Line out_L"
two "ear R" to "BLINE_OUT_R" and "Line out R"

Intel's pin descriptions for the 10 pin block

1 port1L
2 GND this one is obvious
3 port1R
4 Presence#
5 port2R
6 Sense1 Ret
7 Sense Send
8 no pin (obvious)
9 Port2L
10 Sense 2 Return

I'm thinking pins 1 and 9 are for the l and 3 and 5 are for the r but the mic leaves me totally lost.

Does anyone have a definite answer.

Dave

 

[LiLithTecH]

PORT 1L = MIC (Front Panel mic input L channel)
PORT 1R = MIC_BIAS (right channel mic)
PRESENCE# = AUD_GND (for use with Intel HD Audio dongle)
PORT 2R = FP_OUT_R (Headphone R channel)
SENSE1_RETURN = FP_RETURN_R (Front Panel Jack detection [JACK1])
SENSE_SEND = AUD_5V (Jack detection sense Line Intel HD Audio)
PORT 2L = FP_OUT_L (Headphone L channel)
SENSE2_RETURN = FP_RETURN_L (Front Panel Jack detection return [JACK2])

 

[djweaver]

thx if you don't mind me asking how did you figure this out or find out this info cause as you can see i had it totally wrong.

 

[LiLithTecH]

The Intel HD Audio is Pin compatiable with the AC'97 audio.
(it would be nice if Intel included that in the manual)