Since things tend to be techie on Fatwallet and Anand, I have never bothered to post things of the other side. That is tool drooling, I have a bigger hammer rather than more MHz hot deals. However, with the positive response to a recent post of a bench top drill press, I here do post my first Harbor Freight 50% OFF listing.
You use these by calling, the Freight at 800-423-2567 or using Harbor Freight and "Ordering from Printed Catalog"
GRADE 7 MIL ELECTRICAL TAPE, 10 rolls of 3/4"x 59'
6047-3BPB $ 2.99
16'' LONG REACH PLIER SET, Staight and 90°
38598-2BPB $ 6.49
12V ROTARY TOOL KIT, 60 accessories, case, and AC/DC adapter
41695-2BPB $ 9.99
ADJUSTABLE BRAKE CYLINDER HONE
40529-3BPB $ 4.99
41 PC. ANGLE DRIVER SET
34273-8BPB $3.99 Great tool, you can't buy the bits for less. Not too strong though. A copy of an American $30 tool.
STEEL BRISTLE BRUSH
38491-1BPB $ 0.99 A very good brush. Made in Italy.
DRILLING HAMMER, short handle with heavy head for driving chisels and the like.
06739-2BPB $ 2.49
21 OZ. FRAMING HAMMER W/ WAFFLED FACE
07396-6BPB $ 2.24 Not the best quality, but come on its about 2 dollars. Well worth it for occasional heavy nailing.
UTILITY KNIFE WITH TWO EXTRA BLADES, this is the snap and break type.
38490-1BPB $ 0.99 A very good snap-type utility blade. I think it has about 15 edges per blade. Yes, two cents per razor edge!
2-1/2" MACHINE VISE, a small vise to go with a bench drill press.
05927-0BPB $ 6.99
1" BRUSHES (PK. OF 2), feathered ends, 6" handle
01509-1BPB $ 0.89
6 PC. REUSABLE ROLLER AND BRUSH SET, painting that is.
39996-2BPB $ 0.99 Reusable, HA, for 99¢? I have used these. Same quality as Wal-Mart.
WINDSOR DESIGN 4 PC. BUTT CHISEL SET
39926-2BPB $ 7.49
36 PC. 1/2" SHOP BRUSHES, the ones with metal tube handles
41338-1BPB $ 2.49
CEN-TECH DIGITAL MULTIMETER AD/DC
37772-3BPB $19.99 House brand. Decent, I bought one for under the drivers seat in each of my vehicles.
7-3/8" ZIP TIES (PACK OF 100)
34635-1BPB $ 1.99 A little brittle, but work and cheap.
20 PC. PARALLEL SET
00789-5BPB $29.99 Usefull with a drill press to make a 2+GHz Athlon water cooler, I guess.
14 PC. PUNCH AND CHISEL SET
00647-8BPB $ 3.99 A little soft and brittle, but a great metal storage rack.
PLASTIC 6" UTILITY CALIPER, millimeters and 16ths
07914-1BPB $ 0.99 Cheap enough to have laying around and in your glove box.
4-1/2" DIAMETER SUCTION CUP, 80 lbs. cap. and automatic operation.
38303-3BPB $ 2.49 If you own an Mitsu Eclipse, these are neccessary for pulling dents. Read: very, very thin metal with no memory.
AUTOMATIC BATTERY FLOAT CHARGER
41288-2BSE $ 7.99 It works and is very cheap.
1"x15' RATCHET TIE DOWN, 1500 LBS. CAPACITY
36584-4BSE $ 1.99 I swear by these. Not curse?they are really great.
4" ANGLE GRINDER, 10,000 RPM
42203-5BSE $17.99 Great for occasional use. The switches die before the bearings or motors.
4" INDUSTRIAL GRINDING WHEELS FOR METAL, Al OXIDE
00771-1BPB $ 4.49 For grinder above. They work and last fine.
STOREHOUSE 407 PC. O-RING SET
41425-2HPB $ 6.49 These are great for repairs. Comes in very nice plastic case. These sell for about $30 in MSC.
500,000 CANDLE POWER, 12 VOLT HALOGEN SPOTLIGHT
40809-1HPB $ 4.99
ROUTER SPEED CONTROL
43060-2HPB $12.49 This exact model sells for $35 at Amazon's Crib.
36 PC. STEEL LETTER/NUMBER STAMPING SET
00800-1HPB $ 4.49 Great for identifing your Kodak DC-4800 from you buddies.
SELF-OPENING BLIND POP-RIVET GUN
07356-4HPB $ 3.49 I think of decent quality.
3 LB. SLEDGE HAMMER
06748-0HPB $ 2.99 This is more like it.
24 OZ. FRAMING HAMMER WITH WAFFLE FACE
03542-3HPB $ 1.99 The gleem in his a little boys eyes with a big hammer in his hands is priceless.
150 PSI PRO. AIR FILTRATION AND REGULATION UNIT
40312-3HPB $22.49 Very well made for the price.
7-1/4", 40 TOOTH C2 TUNGSTEN CARBIDE TIPPED ADJUSTABLE DADO BLADE
36912-3HPB $14.99
1" DIAL INDICATOR
33675-2HPB $ 6.99
EMERY CLOTH ASSORTMENT (40 PCS.)
36509-2HPB $ 2.99 Good quality in my experience.
TEFLON THREAD SEAL TAPE, 3/4"X260" (10 ROLLS)
04636-1HPB $ 1.49 It works.
12'x3/4" ORANGE TAPE MEASURE
35488-1HPB $ 1.49
SUPER 3 PC. WIRE BRUSH SET. ONE NYLON, ONE BRASS, ONE STAINLESS
07346-2HPB $ 1.74 Very good brushes. Have you ever priced a stainless brush?
SWIVEL HEAD HAND POP-RIVETER
40690-3HPB $ 4.99
ONE MAN BRAKE BLEEDER KIT
37201.2HPB $ 1.99 I use this, it's a great product.
BUSHING/BEARING REMOVAL AND INSTALL SET
38145-6HPB $ 4.99
LATEX GLOVES, PACK OF 100
36117-8HPB $ 3.49 MEDIUM USE THESE WISELY
36118-8HPB $ 3.49 LARGE
37049-8HPB $ 3.49 EXTRA LARGE
TORPEDO BOY LASER LEVEL KIT WITH TRIPOD
41102-3HRB $19.99
1/2" DRIVE CLICKER TORQUE WRENCH
00239-3HRB $ 9.99
DUST AND PARTICLE MASKS, PK. OF 50
50026-1HRB $ 3.99
5 PC. 8 TO 32 OZ. BALL PEIN HAMMER SET
36523-5HRB $ 4.99 Ahhhh, hammers are good, but these are Chinese. They are definitely worth 5 bucks though. The handles are worth 5 bucks.
3/4" - 2-1/2" HOLE SAW SET (13 PC.)
38425-1HRB $ 5.99 Not for metal.
2-1/2" - 5" HOLE SAW SET (10 PC.)
36222-0HRB $ 6.49 Not for metal.
2 PC. TONGUE AND GROVE PLIERS
37390-3HRB $ 4.49 Unbelievable price on these. They are very well made and hard.
HI-OUTPUT LASER POINTER
37431-1HRB $ 5.99
7 FUNCTION DIGITAL MULTIMETER
30756-1HRB $ 4.99
10" PNEUMATIC TIRE WITH WHITE RIM
30900-0HRB $ 4.99
10" PNEUMATIC TIRE WITH GOLD RIM
41475-2HRB $ 4.99
150 PC. STOREHOUSE SAE LOCKNUT SET
35537-2HRB $ 4.99
3/8" DRIVE PROFESSIONAL AIR RACHET
05539-4HRB $18.49 Harbor's house brand professional labeled tools tend to be quite good. Usually made in Japan or Taiwan. There normal pneumatics are usually Chinese with lesser bearings, seals and hardening.
1/4" AIR CROWN STAPLER KIT
42332-5HRB $24.99
SPRING LOADED CENTER PUNCH
00621-1BSE $ 1.99 This is a great item. Especially with a drill press.
1/4" SWIVEL AIR CONNECTOR
07536-6BSE $ 2.74 These are well made aluminum. They go for about $10 elsewhere.
HELPING HANDS WITH MAGNIFYING GLASS
00319-0BSE $ 1.99 The quintessence of a soldering station for 2 bucks folks.
MICRO TORCH, USES BUTANE
42099-4BSE $ 4.99
SELF-PRIMING SIPHON PUMP
37739-1BSE $ 4.99 Can help defray the high cost of gasoline
ROUND MAGNETIC PARTS HOLDER
00659-2BSE $ 2.49 Handy, stainless steel.
3/8" PROFESSIONAL AIR IMPACT WRENCH
34945-2BSE $19.99 Harbor's professional house brand.
4 PC. SOCKET ADAPTER SET
01793-5BSE $ 1.99 Very handy.
2"x20' RACHET TIE DOWNS, 2500 LBS.
36602-2BSE $ 4.49
FREE ATTACHE IF YOU ORDER $29.99 OF ITEMS WITH THE "BSE" CATALOG EXTENSION.
ASK FOR ATTACHE ITEM NUMBER, 35233-0BSE
I also stronly urge you to subscribe to Harbor Freight's Inside Track Club if you like tools. It is well worth the $15/year membership just for the fun of leafing through the catalog.
You use these by calling, the Freight at 800-423-2567 or using Harbor Freight and "Ordering from Printed Catalog"
GRADE 7 MIL ELECTRICAL TAPE, 10 rolls of 3/4"x 59'
6047-3BPB $ 2.99
16'' LONG REACH PLIER SET, Staight and 90°
38598-2BPB $ 6.49
12V ROTARY TOOL KIT, 60 accessories, case, and AC/DC adapter
41695-2BPB $ 9.99
ADJUSTABLE BRAKE CYLINDER HONE
40529-3BPB $ 4.99
41 PC. ANGLE DRIVER SET
34273-8BPB $3.99 Great tool, you can't buy the bits for less. Not too strong though. A copy of an American $30 tool.
STEEL BRISTLE BRUSH
38491-1BPB $ 0.99 A very good brush. Made in Italy.
DRILLING HAMMER, short handle with heavy head for driving chisels and the like.
06739-2BPB $ 2.49
21 OZ. FRAMING HAMMER W/ WAFFLED FACE
07396-6BPB $ 2.24 Not the best quality, but come on its about 2 dollars. Well worth it for occasional heavy nailing.
UTILITY KNIFE WITH TWO EXTRA BLADES, this is the snap and break type.
38490-1BPB $ 0.99 A very good snap-type utility blade. I think it has about 15 edges per blade. Yes, two cents per razor edge!
2-1/2" MACHINE VISE, a small vise to go with a bench drill press.
05927-0BPB $ 6.99
1" BRUSHES (PK. OF 2), feathered ends, 6" handle
01509-1BPB $ 0.89
6 PC. REUSABLE ROLLER AND BRUSH SET, painting that is.
39996-2BPB $ 0.99 Reusable, HA, for 99¢? I have used these. Same quality as Wal-Mart.
WINDSOR DESIGN 4 PC. BUTT CHISEL SET
39926-2BPB $ 7.49
36 PC. 1/2" SHOP BRUSHES, the ones with metal tube handles
41338-1BPB $ 2.49
CEN-TECH DIGITAL MULTIMETER AD/DC
37772-3BPB $19.99 House brand. Decent, I bought one for under the drivers seat in each of my vehicles.
7-3/8" ZIP TIES (PACK OF 100)
34635-1BPB $ 1.99 A little brittle, but work and cheap.
20 PC. PARALLEL SET
00789-5BPB $29.99 Usefull with a drill press to make a 2+GHz Athlon water cooler, I guess.
14 PC. PUNCH AND CHISEL SET
00647-8BPB $ 3.99 A little soft and brittle, but a great metal storage rack.
PLASTIC 6" UTILITY CALIPER, millimeters and 16ths
07914-1BPB $ 0.99 Cheap enough to have laying around and in your glove box.
4-1/2" DIAMETER SUCTION CUP, 80 lbs. cap. and automatic operation.
38303-3BPB $ 2.49 If you own an Mitsu Eclipse, these are neccessary for pulling dents. Read: very, very thin metal with no memory.
AUTOMATIC BATTERY FLOAT CHARGER
41288-2BSE $ 7.99 It works and is very cheap.
1"x15' RATCHET TIE DOWN, 1500 LBS. CAPACITY
36584-4BSE $ 1.99 I swear by these. Not curse?they are really great.
4" ANGLE GRINDER, 10,000 RPM
42203-5BSE $17.99 Great for occasional use. The switches die before the bearings or motors.
4" INDUSTRIAL GRINDING WHEELS FOR METAL, Al OXIDE
00771-1BPB $ 4.49 For grinder above. They work and last fine.
STOREHOUSE 407 PC. O-RING SET
41425-2HPB $ 6.49 These are great for repairs. Comes in very nice plastic case. These sell for about $30 in MSC.
500,000 CANDLE POWER, 12 VOLT HALOGEN SPOTLIGHT
40809-1HPB $ 4.99
ROUTER SPEED CONTROL
43060-2HPB $12.49 This exact model sells for $35 at Amazon's Crib.
36 PC. STEEL LETTER/NUMBER STAMPING SET
00800-1HPB $ 4.49 Great for identifing your Kodak DC-4800 from you buddies.
SELF-OPENING BLIND POP-RIVET GUN
07356-4HPB $ 3.49 I think of decent quality.
3 LB. SLEDGE HAMMER
06748-0HPB $ 2.99 This is more like it.
24 OZ. FRAMING HAMMER WITH WAFFLE FACE
03542-3HPB $ 1.99 The gleem in his a little boys eyes with a big hammer in his hands is priceless.
150 PSI PRO. AIR FILTRATION AND REGULATION UNIT
40312-3HPB $22.49 Very well made for the price.
7-1/4", 40 TOOTH C2 TUNGSTEN CARBIDE TIPPED ADJUSTABLE DADO BLADE
36912-3HPB $14.99
1" DIAL INDICATOR
33675-2HPB $ 6.99
EMERY CLOTH ASSORTMENT (40 PCS.)
36509-2HPB $ 2.99 Good quality in my experience.
TEFLON THREAD SEAL TAPE, 3/4"X260" (10 ROLLS)
04636-1HPB $ 1.49 It works.
12'x3/4" ORANGE TAPE MEASURE
35488-1HPB $ 1.49
SUPER 3 PC. WIRE BRUSH SET. ONE NYLON, ONE BRASS, ONE STAINLESS
07346-2HPB $ 1.74 Very good brushes. Have you ever priced a stainless brush?
SWIVEL HEAD HAND POP-RIVETER
40690-3HPB $ 4.99
ONE MAN BRAKE BLEEDER KIT
37201.2HPB $ 1.99 I use this, it's a great product.
BUSHING/BEARING REMOVAL AND INSTALL SET
38145-6HPB $ 4.99
LATEX GLOVES, PACK OF 100
36117-8HPB $ 3.49 MEDIUM USE THESE WISELY
36118-8HPB $ 3.49 LARGE
37049-8HPB $ 3.49 EXTRA LARGE
TORPEDO BOY LASER LEVEL KIT WITH TRIPOD
41102-3HRB $19.99
1/2" DRIVE CLICKER TORQUE WRENCH
00239-3HRB $ 9.99
DUST AND PARTICLE MASKS, PK. OF 50
50026-1HRB $ 3.99
5 PC. 8 TO 32 OZ. BALL PEIN HAMMER SET
36523-5HRB $ 4.99 Ahhhh, hammers are good, but these are Chinese. They are definitely worth 5 bucks though. The handles are worth 5 bucks.
3/4" - 2-1/2" HOLE SAW SET (13 PC.)
38425-1HRB $ 5.99 Not for metal.
2-1/2" - 5" HOLE SAW SET (10 PC.)
36222-0HRB $ 6.49 Not for metal.
2 PC. TONGUE AND GROVE PLIERS
37390-3HRB $ 4.49 Unbelievable price on these. They are very well made and hard.
HI-OUTPUT LASER POINTER
37431-1HRB $ 5.99
7 FUNCTION DIGITAL MULTIMETER
30756-1HRB $ 4.99
10" PNEUMATIC TIRE WITH WHITE RIM
30900-0HRB $ 4.99
10" PNEUMATIC TIRE WITH GOLD RIM
41475-2HRB $ 4.99
150 PC. STOREHOUSE SAE LOCKNUT SET
35537-2HRB $ 4.99
3/8" DRIVE PROFESSIONAL AIR RACHET
05539-4HRB $18.49 Harbor's house brand professional labeled tools tend to be quite good. Usually made in Japan or Taiwan. There normal pneumatics are usually Chinese with lesser bearings, seals and hardening.
1/4" AIR CROWN STAPLER KIT
42332-5HRB $24.99
SPRING LOADED CENTER PUNCH
00621-1BSE $ 1.99 This is a great item. Especially with a drill press.
1/4" SWIVEL AIR CONNECTOR
07536-6BSE $ 2.74 These are well made aluminum. They go for about $10 elsewhere.
HELPING HANDS WITH MAGNIFYING GLASS
00319-0BSE $ 1.99 The quintessence of a soldering station for 2 bucks folks.
MICRO TORCH, USES BUTANE
42099-4BSE $ 4.99
SELF-PRIMING SIPHON PUMP
37739-1BSE $ 4.99 Can help defray the high cost of gasoline
ROUND MAGNETIC PARTS HOLDER
00659-2BSE $ 2.49 Handy, stainless steel.
3/8" PROFESSIONAL AIR IMPACT WRENCH
34945-2BSE $19.99 Harbor's professional house brand.
4 PC. SOCKET ADAPTER SET
01793-5BSE $ 1.99 Very handy.
2"x20' RACHET TIE DOWNS, 2500 LBS.
36602-2BSE $ 4.49
FREE ATTACHE IF YOU ORDER $29.99 OF ITEMS WITH THE "BSE" CATALOG EXTENSION.
ASK FOR ATTACHE ITEM NUMBER, 35233-0BSE
I also stronly urge you to subscribe to Harbor Freight's Inside Track Club if you like tools. It is well worth the $15/year membership just for the fun of leafing through the catalog.
Facebook
Twitter